Dorman - Autograde Wheel Lug Stud P/N:610-388
Keep your front wheel clamped firmly to the hub with this Dorman wheel lug stud, part number 610-346 from the Dorman - Autograde line, a 9/16-18 serrated stud made of carbon steel. It fits many vehicles, among them the 1997 Ford F-450 Super Duty, 1989-1997 Ford F-53 Motorhome Chassis and 1989-1997 Ford F-59 Commercial Stripped Chassis, and serves as a direct-fit replacement for the listed front-position applications. See the "Vehicles it fits" section for the full list.
Dorman makes these lug studs from carbon steel and tests them to demanding automotive industry standards for strength, longevity and safety.
Specifications: 9/16-18 thread, 0.625 in. serrated knurl, 2-9/16 in. length.
A wheel lug stud is pressed into the hub flange, and the lug nut threads onto it to hold the wheel against the hub. Stripped threads or a stud that is bent, broken or spinning in the hub are signs it may need replacing. Follow the vehicle service information for installation and lug nut torque.
Interchange: 4773407 · E8TZ1107B · 97262 · 27750B · RB27750B · BD61411
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What does a front wheel lug stud do?
It is the threaded stud pressed into the hub flange. The lug nut tightens onto it to clamp the wheel against the hub. Dorman 610-346 is cataloged for the front position.
What are the specs of Dorman 610-346?
It is a 9/16-18 serrated wheel stud with a 0.625 in. knurl and a 2-9/16 in. length. It is made of carbon steel that meets SAE standards for strength and hardness.
Does it fit a 1989-1997 Ford F-53 Motorhome Chassis?
Yes. It is a direct-fit replacement for the 1989-1997 Ford F-53 Motorhome Chassis and the 1989-1997 Ford F-59 Commercial Stripped Chassis. See the "Vehicles it fits" section for other listed vehicles.
What are signs a wheel lug stud may need replacing?
Common signs are stripped or damaged threads, a bent or broken stud, or a stud that spins in the hub when the lug nut is turned.
How is a serrated wheel lug stud installed?
The serrated knurl is pressed into the hub flange, which locks the stud in place. Follow the vehicle service information for the procedure and the lug nut torque specification.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.