Dorman - Autograde Wheel Lug Stud P/N:610-222
Dorman 610-558 wheel lug stud for the 2011 Ram 2500 and other vehicles holds the wheel to the hub.
Stripped or stretched threads, a lug nut that will not tighten or a bent stud can mean a stud needs replacing. Before you replace one, rule out a worn lug nut or a damaged wheel seat as the source of the loose fit. Each lug position on the hub takes one stud.
The 2011 Ram 2500, the 2003-2010 Dodge Ram 2500 and the 2007-2008 Dodge Ram 1500 take this stud, and so do more vehicles. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
10 wheel lug studs.
Interchange: 5096145AA · 68049119AA
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Dorman 610-558 fit the 2003-2010 Dodge Ram 2500?
Yes. Dorman 610-558 is listed for the 2003-2010 Dodge Ram 2500, and it is also listed for the 2007-2008 Dodge Ram 1500.
How many studs come in this Dorman wheel lug stud pack?
The pack holds 10 studs, and each stud goes in one lug position on the hub.
What thread does the Dorman 610-558 stud use?
Dorman 610-558 has a 9/16-18 SAE thread, 18 threads per inch, turning clockwise (right). Thread length is 1.5 in and the length under the head is 2.5 in.
Is this wheel lug stud tested for rust resistance and strength?
Yes. This steel stud goes through extensive salt spray testing for rust resistance and industry-standard proof-load testing for strength.
Does Dorman 610-558 replace 5096145AA?
Yes. Dorman 610-558 is listed as a replacement for 5096145AA, and for 68049119AA as well.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.