Dorman - Autograde Wheel Lug Stud P/N:610-286
Keep each wheel firmly clamped to its hub with this Dorman wheel lug stud, part number 610-566, a Dorman Autograde M12-1.25 serrated stud made of carbon steel and tested to demanding automotive industry standards for strength and safety. It fits many vehicles, among them the 2009-2026 Subaru Forester, 2008-2025 Subaru Outback and 2004-2026 Subaru Impreza, and it is listed for both front and rear wheel positions as a direct-fit replacement for the listed applications. See the "Vehicles it fits" section for the full list.
Specifications: M12-1.25 thread, serrated knurl measuring 14.38 mm, and an overall length of 43.5 mm.
A wheel lug stud is the threaded stud seated in the wheel hub that the lug nut tightens onto, holding the wheel against the hub. Signs a stud may need replacing include stripped or damaged threads, a bent or broken stud, or a stud that spins in the hub when the lug nut is tightened. If a stud on your vehicle shows these signs, this part is designed to replace it. Follow the vehicle service information for installation and lug nut torque.
Interchange: 28365FE000 · 28365FE001 · SU00300781
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What does a wheel lug stud do?
It is the threaded stud seated in the wheel hub that the lug nut tightens onto, clamping the wheel against the hub. This stud is listed for both front and rear wheel positions.
What are the specifications of Dorman 610-566?
It has an M12-1.25 thread, a serrated knurl measuring 14.38 mm and an overall length of 43.5 mm, and it is made of carbon steel that meets SAE standards for strength and hardness.
Does this lug stud fit the 2009-2026 Subaru Forester?
Yes, it is listed for the 2009-2026 Subaru Forester and also fits many other vehicles, including the 2008-2025 Subaru Outback and 2004-2026 Subaru Impreza. Check the "Vehicles it fits" section for your exact vehicle.
What are signs a wheel lug stud may need replacing?
Stripped or damaged threads, a bent or broken stud, or a stud that spins in the hub when the lug nut is tightened can all mean the stud should be replaced.
How is a serrated wheel lug stud installed?
The serrated knurl seats the stud in the wheel hub. Follow the vehicle service information for the removal and installation procedure and the correct lug nut torque.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.