Dorman - First Stop Brake Hydraulic Hose P/N:H622180
Route high-pressure brake fluid from the hard line to the front brakes with the Dorman - First Stop Brake Hydraulic Hose H18167. This flexible brake hose carries pressurized brake fluid while flexing with suspension and steering travel, and it drops in as a front-position (front left or front right) replacement for a wide range of mid-1950s Ford and Mercury cars, including the 1955-1956 Ford Club, 1954 Ford Country Sedan, 1954 Ford Country Squire, 1954-1956 Ford Courier Sedan Delivery, 1961 Ford Fairlane, 1954-1956 Ford Skyliner, 1955-1956 Ford Thunderbird, 1954-1956 Mercury Custom and 1954-1956 Mercury Monterey — see the Buyer's Guide tab for the full list. Listed applications use the All engine designation and take one hose per position.
Built to replicate the original hose's fit, function and performance on the listed vehicles and positions. Overall length 14.38 in; End 1 thread size 3/8 in-24; End 2 fitting inside diameter 3/8-24; color black. Gasket or seal, mounting hardware, bracket and jacket are not included — consult the vehicle service information for the correct fasteners and whether they may be reused. Country of origin: China.
Interchange: 87-34000 · 8734000 · B916012 · B918064 · 610126 · HB-81000 · HB81000 · 150.61000 · 150.61082 · BH401200 · 350-54059 · 35054059 · 350-56004 · 35056004 · B9MM2078A · 769815 · 769816 · BH18167 · 2203014 · F18167 · Manufacturer part number H18167.
This part cross-references / interchanges with the following part numbers:
What does this brake hydraulic hose do?
It carries pressurized brake fluid from the vehicle's steel hard line to the front brake, flexing with suspension and steering movement while keeping the hydraulic circuit sealed.
Which vehicles and position does H18167 fit?
It is a front-position (front left or front right) replacement for many 1954-1961 Ford and Mercury models, such as the Ford Fairlane, Thunderbird and Mercury Monterey. See the Buyer's Guide tab for the full list.
Is this hose DOT approved?
Yes. The catalog lists it as DOT approved, and its materials are tested to government-regulated safety and durability standards.
What is the hose made of?
The hose is EPDM rubber with a rubber outer sleeve, and it uses treated-steel fittings — a male fitting at End 1 and a female fitting at End 2 — with specially coated, corrosion-resistant hardware.
Does it include mounting hardware, a bracket or a gasket?
No. Mounting hardware, bracket, jacket and any gasket or seal are not included. Consult the vehicle service information for the correct fasteners and whether they may be reused.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.