Keep firm, responsive braking at the front-left corner with the Dorman - First Stop Brake Hydraulic Hose H380306. This flexible hose carries pressurized brake fluid from the chassis hard line to the front-left caliper, flexing as the wheel steers and moves through suspension travel. It's built as a position-specific, direct-fit replacement for the 1995-2000 Chrysler Cirrus [All], 1996-1997 Chrysler Stratus [All], 1995-2000 Dodge Stratus [All], and 1996-2000 Plymouth Breeze [All].
The 17.38 in hose uses EPDM rubber with a rubber outer jacket, a banjo fitting on one end and a female fitting (3/8-24 inside diameter) on the other, both made from treated steel. A stamped steel bracket and gaskets are included; mounting hardware is not included—consult the vehicle service information for the correct fasteners and whether they may be reused.
Interchange: 18J1129 · 87-32049 · 8732049 · B916629 · 611043 · HB-83049 · HB83049 · 78107 · 150.63049 · 15063049 · 4616063 · BH178107 · 350-40028 · 35040028 · NF380306 · BH380306 · 2203237 · BH132426 · F132426
Manufacturer part number H380306
This part cross-references / interchanges with the following part numbers:
What does this brake hydraulic hose do?
It carries pressurized brake fluid from the chassis hard line to the front-left brake caliper, flexing with steering and suspension movement so the connection stays sealed.
Which vehicles does it fit?
A direct-fit for the front-left position on the 1995-2000 Chrysler Cirrus, 1996-1997 Chrysler Stratus, 1995-2000 Dodge Stratus, and 1996-2000 Plymouth Breeze (All engines). See the Buyer's Guide tab.
What's included in the box?
One brake hose plus gaskets and a stamped steel bracket. Mounting hardware is not included—consult the vehicle service information for the correct fasteners and whether they may be reused.
What is it made of?
An EPDM rubber hose with a rubber outer jacket, a banjo fitting on one end and a female fitting (3/8-24 inside diameter) on the other, both treated steel with specially coated, corrosion-resistant fittings. It is DOT approved.
What are signs my brake hose may need replacing?
Cracking, bulging, or fluid leaking at the hose, or a soft or spongy pedal, can be signs. If a failed hose is the cause, this replaces it—diagnose the cause before replacing.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.