Dorman - First Stop Brake Hydraulic Hose P/N:H621023
Dorman H38328 brake hydraulic hose for the 2001-2005 Dodge Stratus and other vehicles carries brake fluid between the rigid brake line and the wheel brake. This Dorman brake hydraulic hose is engineered to perform like the original hose on specific vehicles and positions.
Cracked or bulging rubber, fluid seepage at a fitting or a soft brake pedal can mean a hose is worn, though a soft pedal can have other causes. Look the hose over with the engine off for cracks, bulges or wet fittings. If a failed hose is the cause, this one replaces it, and a shop can test anything that needs the car running.
It is listed for a wide range of Chrysler, Dodge, Eagle, Mitsubishi and Plymouth models, among them the 1995-2005 Chrysler Sebring and the 1995-2005 Mitsubishi Eclipse. Open the "Vehicles it fits" section to check your exact model and engine. This listing is one hose; the 2001-2005 Dodge Stratus is listed at one hose per application, and hoses for other positions are ordered separately.
Fit and size
Build and materials
One brake hydraulic hose. A gasket or seal, mounting hardware, a bracket and a jacket are not included, so plan on new hardware, since the old pieces may not be reusable.
Product information is for general reference and may contain errors. See our Disclaimer.
Is the Dorman H38328 brake hydraulic hose right for the 2001-2005 Dodge Stratus?
Yes. Dorman H38328 is listed for the 2001-2005 Dodge Stratus, the 1995-2005 Chrysler Sebring and the 1995-2005 Mitsubishi Eclipse, among others; open the "Vehicles it fits" section to check your exact model and engine.
Does the H38328 brake hydraulic hose come with mounting hardware or a bracket?
No. This listing is one brake hydraulic hose; mounting hardware, a bracket, a gasket or seal and a jacket are not included.
What is the Dorman H38328 hose made of?
Dorman H38328 has an EPDM rubber hose and a rubber outer sleeve. Both fittings are treated steel with a corrosion-resistant coating.
What are the length and fitting sizes of this brake hydraulic hose?
It is 10.5 inches long overall. End 1 is a male fitting with a 10 mm thread size, and end 2 is a female fitting with an M10 x 1.0 inside diameter.
How can I tell if a brake hydraulic hose like the H38328 is worn?
Cracks or bulges in the rubber, fluid seepage at a fitting or a soft pedal can mean a worn hose. Have a shop inspect any brake fluid leak promptly.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.