Dorman - First Stop Brake Hydraulic Hose P/N:H38426
Keep hydraulic pressure moving to the rear brakes with the Dorman - First Stop Brake Hydraulic Hose H38510 — a flexible rear brake hose that carries pressurized brake fluid from the vehicle's hard line to the rear brake while flexing with suspension and axle movement. It's a position-specific replacement for the rear (rear right / rear left) position on a long list of INTERNATIONAL medium-duty trucks, including the 1980-1982 S1624, 1987-1989 1452SC, 1990-1997 4700, 1990-1997 4900, and 1992-1997 3600 (engine: All) — see the Buyer's Guide tab for the full list.
Engineered to the original hose's measurements for a precise fit and straightforward installation on the listed applications. This listing includes one brake hose; no mounting hardware, bracket, gasket/seal, or outer jacket is included — consult the vehicle service information for the correct fasteners and whether they may be reused. Signs this hose may need replacing include bulging, cracking, chafing, or fluid weeping at the fittings; if a failed hose is the cause of a spongy pedal, this replaces it. Country of origin: China.
Interchange: 18J545 · B917363 · 610623 · HB-94300 · HB94300 · 77512 · 150.83300 · BH177512 · 350-71057 · 35071057 · 578961C92 · BH38510 · 2203082 · BH113154 · BH132922 · F113154 · F132922 · Manufacturer part number H38510
This part cross-references / interchanges with the following part numbers:
What does this brake hydraulic hose do?
It carries pressurized brake fluid from the vehicle's hard line to the rear brake while flexing with suspension and axle movement, maintaining the hydraulic connection to the wheel.
What position is this hose for?
It is cataloged for the rear position (rear right / rear left) on the listed INTERNATIONAL applications.
What is it made of?
The hose is EPDM rubber with specially coated, corrosion-resistant treated-steel fittings. End 1 is a male 7/16 in-24 fitting and End 2 is a female fitting with a 7/16-24 inside diameter.
Is any hardware or a bracket included?
No. The listing includes one brake hose only — no mounting hardware, bracket, gasket/seal, or outer jacket. Consult the service information for the correct fasteners and whether they may be reused.
What are signs this hose may need replacing?
Bulging, cracking, chafing, or fluid weeping at the fittings, or a spongy pedal. Diagnose the cause first; if a failed hose is the source, this replaces it.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.