Dorman - First Stop Brake Hydraulic Hose P/N:H380480
Dorman H620277 rear left brake hydraulic hose for the 1997-2002 Land Rover Range Rover carries brake fluid pressure to the brake at that wheel. This Dorman brake hydraulic hose is a flexible hose that joins the fixed brake line to the wheel brake.
A soft brake pedal, brake fluid seeping at the hose, or cracked or bulging rubber can mean a brake hose is failing. These signs can have other causes, so find the cause before replacing the hose. With the engine off, look the hose over for cracks, bulges or wet spots; a shop can test the rest.
It is a direct-fit replacement for the 1997-2002 Land Rover Range Rover, built to match the original brake hose's performance. This listing is one hose, sold individually. The 1997-2002 Land Rover Range Rover takes one at the rear left, the rear right is ordered separately, and the two are normally replaced together.
Fit and size
Build and materials
One brake hydraulic hose with gaskets and a bracket. Mounting hardware is not included, so plan on new bolts, since the old ones may not be reusable.
Interchange: 150.22304 · 350-11026
611697 · 79174 · ANR4703 · BH416450 · BH382442 · 2204575
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Dorman H620277 rear left hose right for the 1997-2002 Land Rover Range Rover?
Yes. Dorman H620277 is a rear left brake hydraulic hose for the 1997-2002 Land Rover Range Rover. The rear right side is a separate part.
Does the Dorman H620277 brake hose come with a bracket and gaskets?
Yes. Dorman H620277 comes with one brake hydraulic hose, gaskets and a bracket. Mounting hardware is not included.
What are the end fittings on this rear left brake hose?
End 1 is a banjo fitting with a 10 mm thread size. End 2 is a female fitting, M10 x 1.0, and both ends are treated steel.
How can I tell if a rear brake hose is going bad?
Cracked or bulging rubber, fluid seeping at the hose or a soft pedal can mean a brake hose is failing. Look only with the engine off, and have a shop inspect brakes promptly.
What is the Dorman H620277 brake hose made of, and is it DOT approved?
Yes, it is DOT approved. The hose is EPDM rubber with a steel outer sleeve, and the fittings are treated steel with a corrosion-resistant coating.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.