Dorman - First Stop Brake Hydraulic Hose P/N:H621569
Deliver brake fluid to the front left wheel through a new flexible line with the Dorman brake hydraulic hose, part number H620463 from the Dorman - First Stop line. It is precision-engineered to match the fit, function and performance of the original brake hose. It fits many vehicles, among them the 2003-2008 Chevrolet Express 1500, 2003-2008 GMC Savana 1500 and 2003-2005 Chevrolet Express 2500. See the "Vehicles it fits" section for the full list.
This flexible hose is designed as part of a complete brake repair. It carries pressurized brake fluid to the brake at the front left wheel and flexes as the suspension and steering move.
Signs a brake hose may need replacing include cracks, bulging or swelling, fluid seepage at the fittings, and a soft or spongy brake pedal. Other brake components can cause these signs too, so diagnose the cause before replacing any parts. If a worn front left hose is the cause, H620463 replaces it. Bleed the brake system after installation.
Interchange: 350-47317
35047317 · 612324 · 15780130 · 15823490 · 25752973 · BH382793 · 2204692 · BH140304
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What does this brake hydraulic hose do?
It carries pressurized brake fluid from the vehicle's rigid brake line to the brake at the front left wheel. It flexes as the suspension and steering move.
Which vans does the Dorman H620463 fit?
It is a direct-fit replacement for the 2003-2008 Chevrolet Express 1500, 2003-2008 GMC Savana 1500 and 2003-2005 Chevrolet Express 2500, among others. See the "Vehicles it fits" section for the full list.
What is this brake hose made of?
The hose is made with EPDM rubber, and its fittings are specially coated to resist corrosion.
What are signs a brake hose may need replacing?
Cracks, swelling, fluid leaks or a spongy brake pedal may be signs of a worn hose. Other brake parts can cause these too, so inspect the system before replacing parts.
Do I need to bleed the brakes after installing it?
Yes. Bleed the brake system after replacing a hydraulic hose to remove air. Check the vehicle service information for the procedure and for any fasteners or sealing washers required.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.