Dorman - First Stop Brake Hydraulic Hose P/N:H621497
Dorman H620554 rear left brake hydraulic hose for the 2004-2007 Ford E-150 and other vehicles carries brake fluid to the rear left brake. As a flexible hose, it moves with the suspension while fluid pressure passes through it.
Cracked or bulging rubber, fluid wetness at a fitting or a soft pedal can mean the hose is failing, though a soft pedal also has other sources, such as a caliper or a brake line. With the engine off, look at the fluid level in the reservoir; a level that keeps dropping points to a leak somewhere in the system, and a shop can trace the source before any part is replaced.
It fits the 2004-2007 Ford E-150, the 2007 Ford E-150 Econoline and the 2004-2005 Ford E-150 Club Wagon, one hose for the rear left position on each. This listing is one hose; the rear right hose is a separate part, and the other side of that axle is normally done at the same time.
Fit and size
Build and materials
One brake hydraulic hose and gaskets. Mounting hardware and a bracket are not included, so plan on new hardware, as the old pieces may not be reusable.
Interchange: 150.65449 · 350-54623
612793 · 4C2Z2A442AC · 6C2Z2A442AB · BH382990 · 2204720 · BH142792 · F142792
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Dorman H620554 hose fit the 2007 Ford E-150 Econoline?
Yes. Dorman H620554 is the rear left brake hydraulic hose for the 2007 Ford E-150 Econoline, and it takes one hose at that position.
Is this Dorman brake hydraulic hose DOT approved?
Yes. Dorman H620554 is DOT approved, with an EPDM rubber hose and treated steel end fittings.
Does this rear left hose come with a gasket or mounting hardware?
Yes, it includes gaskets with the one hose. No mounting hardware or bracket is included.
What fittings are on the ends of this rear left brake hose?
One end is a treated steel banjo fitting with a 0.38 in thread size, and the other is a treated steel female inverted-flare fitting with a 3/8-24 in thread.
How can I tell if this rear left brake hose needs replacing?
Cracks or bulges in the rubber, or fluid wetness at a fitting, can mean the hose is failing. This hose is 16.3 in overall, so you can compare the old one against that.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.