Dorman - First Stop Brake Hydraulic Hose P/N:H621811
Give the front right brake of your 2007-2011 Honda CR-V a fresh, flexible fluid connection with this Dorman brake hydraulic hose, part number H620741 from the Dorman - First Stop line. It is a direct-fit replacement for the front right position on the listed applications. It carries pressurized brake fluid from the vehicle's rigid brake line to the brake at the wheel and flexes as the suspension and steering move.
Dorman designed this hose to match the original's fit, function and performance for specific vehicles and positions, so it can serve as one piece of a complete brake repair.
Signs a brake hose may need replacing include visible cracks, bulging or swelling, fluid seepage at the hose or its fittings, and a soft or spongy brake pedal. Other brake components can cause similar symptoms, so inspect the system before replacing parts. After installation, bleed the brake system as directed by the vehicle service information, which also lists the correct fasteners and whether they may be reused.
Interchange: 073-1862 · 150.40111 · 350-59083
0731862 · 15040111 · 35059083 · 611767 · 01464SWA000 · NF382559 · BH382559 · 2202745 · BH142815 · F142815
This part cross-references / interchanges with the following part numbers:
What does a brake hydraulic hose do?
It carries pressurized brake fluid from the vehicle's rigid brake line to the brake at the wheel, and it flexes as the suspension and steering move.
Which position does Dorman H620741 fit on the 2007-2011 Honda CR-V?
It is cataloged for the front right position on the 2007-2011 Honda CR-V. Check the Buyer's Guide tab to confirm the match for your vehicle.
What is this brake hose made of?
Dorman makes it with EPDM rubber and fits it with specially coated, corrosion-resistant fittings.
What are signs a brake hose may need replacing?
Cracks, bulging, fluid seepage at the hose or its fittings, or a soft, spongy pedal may mean the hose needs replacing. Other brake parts can cause similar symptoms, so inspect the system first.
Do I need to bleed the brakes after installing it?
Yes. Opening the hydraulic system lets air in, so bleed the brakes after installation and follow the vehicle service information for fasteners and torque values.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.