Dorman - First Stop Brake Hydraulic Hose P/N:H621569
Dorman H620754 rear right brake hydraulic hose for the 2002-2005 Pontiac Montana and other vehicles carries brake fluid through a flexible line to the rear right brake. It is made to match the performance of the original brake hose in this position, as part of a complete brake repair.
Cracked or bulging rubber, fluid seepage at a fitting or a spongy pedal can mean the hose is failing. A spongy pedal has other possible causes in the brake system, so before replacing it, look at the brake fluid level in the reservoir with the engine off; a falling level can come from a leak elsewhere, and a shop can trace the source.
It fits the 2002-2005 Pontiac Montana, the 2002-2004 Chevrolet Venture and the 2002-2004 Oldsmobile Silhouette. This listing is one hose for the rear right; the rear left is a separate part, and the rear pair is normally replaced at the same time.
Fit and size
Build and materials
One brake hydraulic hose and gaskets. Mounting hardware and a bracket are not included, so plan on new hardware, as the old pieces may not be reusable.
Interchange: 150.62395
611810 · 10303359 · 10320040 · 10343495 · BH382631 · 2202731 · BH143181 · BH144569 · F143181 · F144569
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does Dorman H620754 fit the 2002-2005 Pontiac Montana?
Yes. Dorman H620754 is a rear right brake hydraulic hose that fits the 2002-2005 Pontiac Montana. The rear left side takes its own hose.
What is this Dorman brake hydraulic hose made of?
Dorman H620754 has an EPDM rubber hose with a rubber outer sleeve. Its fittings are treated steel with a special corrosion-resistant coating.
Does this rear right brake hydraulic hose come with gaskets?
Yes. The package holds one brake hydraulic hose and gaskets. Mounting hardware and a bracket are not included.
What fittings does this brake hydraulic hose have on each end?
One end is a banjo fitting with a 10 mm thread size. The other end is a female fitting at M10 x 1.0, and both are treated steel.
What signs can show this rear right brake hydraulic hose is wearing out?
Cracked or bulging rubber, or fluid seepage at a fitting, can mean the hose is failing. Have a shop inspect any brake fluid leak promptly.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.