Dorman - First Stop Brake Hydraulic Hose P/N:H36664
Keep brake fluid moving to the rear right wheel with this Dorman brake hydraulic hose from the First Stop line, part number H620962. It is a direct-fit replacement for the rear right position on the 2007-2013 Hyundai Santa Fe and the 2009 and 2011-2013 Kia Sorento. See the "Vehicles it fits" section for engine and trim details.
A brake hydraulic hose is the flexible link between the rigid brake line and the brake at the wheel. It carries pressurized brake fluid while flexing as the suspension moves. Dorman designed this hose as part of a complete brake repair, engineered so its fit, function and performance mirror the original hose on specific vehicles and positions.
Signs this hose may need replacing include cracked, swollen or bulging rubber, fluid seeping at the hose or its fittings, or a soft, spongy pedal. If a worn rear right hose is the cause, this part replaces it. Bleed the brakes after installation.
Interchange: 150.51325 · 350-03111
15051325 · 35003111 · 612651 · 587380W000 · 587382B000 · 587382B010 · BH382653 · 2202855 · BH143110 · F143110
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Which vehicles does the H620962 hose fit?
It fits the rear right position on the 2007-2013 Hyundai Santa Fe and the 2009 and 2011-2013 Kia Sorento. See the "Vehicles it fits" section for engine and trim details.
What does a brake hydraulic hose do?
It carries pressurized brake fluid from the rigid brake line to the brake at the wheel. It flexes as the suspension moves.
What is this brake hose made of?
Dorman makes it with EPDM rubber and specially coated, corrosion-resistant fittings. Its materials are tested to government-regulated safety and durability standards.
What are signs a brake hose may need replacing?
Common signs are cracked, swollen or bulging rubber, fluid leaking at the hose or fittings, and a soft or spongy pedal. Diagnose the cause before replacing parts.
Do the brakes need bleeding after installing the hose?
Yes. Opening the hydraulic system lets air in, so bleed the brakes afterward. Check the service information for any sealing washers the fittings require and the correct fastener torque.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.