Dorman - First Stop Brake Hydraulic Hose P/N:H622312
Keep pressurized brake fluid flowing to the caliper with the Dorman First Stop brake hydraulic hose, part number H621024, a front left hose for the 2007-2010 Ford Expedition and 2007-2010 Lincoln Navigator. Dorman precision-engineered it to fit, function and perform like the original brake hose on these specific vehicles and position, making it a direct-fit replacement for the listed applications as part of a complete brake repair. See the "Vehicles it fits" section for engine details.
A flexible brake hose carries pressurized brake fluid between the vehicle's rigid brake line and the caliper while flexing with suspension and steering movement. Signs this hose may need replacing include cracks, bulges or swelling in the outer cover, fluid seeping at the hose or its fittings, or a soft, spongy brake pedal. Other brake components can cause similar symptoms, so diagnose the cause before replacing. This listing covers the front left hose, and replacing both front hoses together is recommended. Bleed the brake system after installation, following the vehicle service information.
Interchange: 150.65190 · 350-54416
611966 · 7L1Z2078A · BH382922 · 2201509 · 15065190 · 35054416
This part cross-references / interchanges with the following part numbers:
What does brake hose H621024 do?
It is a flexible hose that carries pressurized brake fluid between the rigid brake line and the brake caliper, flexing as the suspension and steering move.
Which vehicles does the H621024 brake hose fit?
It fits the 2007-2010 Ford Expedition and 2007-2010 Lincoln Navigator in the front left position. See the "Vehicles it fits" section for engine details.
What is this brake hose made of?
Dorman builds it with EPDM rubber and specially coated, corrosion-resistant fittings, and its materials are tested to government-regulated safety and durability standards.
What signs suggest a brake hose may need replacing?
Cracks, bulges or swelling in the cover, fluid leaks at the hose or fittings, or a soft, spongy pedal may indicate a worn hose. Other brake parts can cause similar symptoms, so diagnose first.
Do I need to bleed the brakes after installing it?
Yes. Opening the hydraulic system lets air in, so bleed the brakes per the vehicle service information and check whether new sealing washers or other hardware are required.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.