Carry pressurized brake fluid to the rear brake with this Dorman brake hydraulic hose from the First Stop line, part number H622011. It is a direct-fit replacement for the rear left or rear right position on the 2010 Ford F-650 (all engines). The flexible hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions, as part of a complete brake repair.
- Ideal replacement: built to match how the original brake hose performs on the listed vehicle.
- Position-specific: made to precise measurements for an exact fit and easy installation.
- Quality assured: its materials are tested to exacting government-regulated safety and durability standards, and the hose is DOT approved.
- Durable design: EPDM rubber hose with specially coated, corrosion-resistant fittings.
Specifications: overall length 39.17 in; axis 1 length 38.39 in; end 1 male fitting with a 7/16 in-24 thread; end 2 female fitting, 7/16-24; treated steel fittings on both ends; plastic outer sleeve (jacket included); stamped steel bracket included; black. A gasket or seal and mounting hardware are not included, so check the vehicle service information for the correct parts and whether the originals may be reused. Country of origin: China.
Sold individually. The listed application uses a quantity of one per rear position, and replacing both rear hoses together is recommended. Cracked, swollen or chafed rubber, seepage at the fittings, or a spongy pedal are signs a hose may need replacing. Other brake faults can cause these signs too, so diagnose first and bleed the brakes after installation.
Interchange: 350-71066
35071066 · 587381W300 · BH382796 · 2201947
This part cross-references / interchanges with the following part numbers:
350-71066, 587381W300, BH382796, 2201947
Frequently Asked Questions
Which vehicle does the Dorman H622011 brake hose fit?
It is a direct-fit replacement for the rear left or rear right position on the 2010 Ford F-650 with all engines. The "Vehicles it fits" section shows the full fitment details.
What does a brake hydraulic hose do?
It is the flexible link that carries pressurized brake fluid from the rigid brake line to the brake at the wheel. It flexes as the suspension moves.
What is included in the box?
The box holds one brake hose with a stamped steel bracket and a plastic outer sleeve. A gasket or seal and mounting hardware are not included.
What are the key specs of this hose?
The overall length is 39.17 in. End 1 has a 7/16 in-24 male fitting and end 2 has a 7/16-24 female fitting. The hose is EPDM rubber with treated steel fittings, and it is DOT approved.
What are signs a brake hose may need replacing?
Look for cracked, swollen or chafed rubber, fluid seepage at the fittings, or a soft, spongy pedal. Other brake faults can cause similar signs, so diagnose the cause first and bleed the brakes after installing.
