Dorman - First Stop Brake Hydraulic Hose P/N:H621682
Dorman H622450 rear left inner brake hydraulic hose for the 2014-2019 Ford E-350 Super Duty and other vehicles carries pressurized brake fluid to the brake at the wheel. This Dorman brake hydraulic hose is a flexible hose made for one position, and it is engineered to match the performance of the original brake hose on specific vehicles.
A cracked or bulging hose, or damp fluid at either end, can mean the hose is wearing out. With the engine off, look the hose over for these signs; a soft pedal or fluid loss can also come from other brake parts, so find the cause before replacing the hose.
It is listed for a wide range of Ford models, including the 2014-2019 Ford E-350 Super Duty, the 2015-2019 Ford E-450 Super Duty and the 2014 Ford E-150. This listing is one hose, and the rear left inner position takes one; the other side of that axle is a separate part, usually done at the same time. If yours is a different Ford, look for its year and model in the "Vehicles it fits" section.
Fit and size
Build and materials
One brake hydraulic hose. A bracket, mounting hardware and a gasket or seal are not included, so plan on new hardware, as the old pieces may not be reusable.
Interchange: 150.65460 · 350-54686
2206605
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Dorman H622450 brake hose fit a 2014-2019 Ford E-350 Super Duty?
Yes. Dorman H622450 is a rear left inner brake hydraulic hose listed for the 2014-2019 Ford E-350 Super Duty and for the 2015-2019 Ford E-450 Super Duty.
Does the H622450 rear left inner hose come with a bracket?
No. The box holds one brake hose; a bracket, mounting hardware and a gasket or seal are not included.
What kind of ends does this brake hose have?
Dorman H622450 has female fittings at both ends. End 1 has a 3/8-24 in thread with an inverted flare, and end 2 has an M10 x 1.0 thread with a bubble flare.
Is a bulging rubber brake hose a sign it needs replacing?
Yes, it can be. A bulge, crack or damp fluid on the hose or at its ends can mean it is failing, so have a shop check it promptly rather than keep driving on it.
What is this rear brake hose made of?
The hose is EPDM rubber with a rubber outer sleeve. The end fittings are treated steel with a corrosion-resistant coating, and the hose is DOT approved.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.