Dorman - First Stop Brake Hydraulic Hose P/N:H622180
Keep firm, responsive braking flowing to the front-left wheel with the Dorman - First Stop Brake Hydraulic Hose H86550. This flexible brake hydraulic hose carries pressurized brake fluid from the chassis hard line out to the front-left wheel while flexing with suspension and steering movement, and it drops in as a direct-fit replacement for the front-left position on 1972-1978 Chevrolet and GMC trucks and vans — including the C/K series, Blazer, Jimmy, Suburban, G-series vans and P-series (engine coverage: All). See the Buyer's Guide tab for the full list of applications.
Signs a brake hose may need replacing include cracking, bulging, or fluid seepage and a soft or spongy pedal. If a failed front-left hose is the cause, this replaces it. Country of origin: China.
Interchange: 18J2034 · 18J52 · 87-44003 · 8744003 · B916218 · 612102 · HB-86003 · HB86003 · 77020 · 150.66003 · 15066003 · BH177020 · 350-47233 · 35047233 · 18031763 · 350917 · 370021 · 9754995 · 9755909 · 9757631 · 9757635 · 9758861 · 4536760 · BH36760 · 2201082 · BH80004 · F80004. Manufacturer part number H86550.
This part cross-references / interchanges with the following part numbers:
What is the H86550 and where does it install?
It's a front-left brake hydraulic hose. It carries pressurized brake fluid from the chassis hard line to the front-left wheel while flexing with suspension and steering movement.
What vehicles does this hose fit?
It's a direct-fit replacement for the front-left position on 1972-1978 Chevrolet and GMC trucks and vans, including C/K, Blazer, Jimmy, Suburban, G-series and P-series. See the Buyer's Guide tab for the full list.
Are a bracket and gaskets included?
Yes. It ships with a stamped steel bracket and gaskets. Mounting hardware is not included—consult the vehicle service information for the correct fasteners and whether they may be reused.
What is the hose made of and what fittings does it use?
The flexible hose is made with EPDM rubber and specially coated, corrosion-resistant fittings. End 1 is a banjo fitting and End 2 is a male fitting, both treated steel; overall length is 22.87 in.
What are the signs this brake hose may need replacing?
Signs include cracking, bulging, or fluid leaks along with a soft or spongy pedal. If the front-left hose is the cause, this DOT-approved hose replaces it.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.