Dorman - First Stop Brake Master Cylinder P/N:M630791
Dorman M39593 brake master cylinder for the 1998-1999 Nissan Pickup and other vehicles turns pedal force into hydraulic pressure for the brakes. Its two outlets send that pressure on to the brake lines.
A soft or sinking brake pedal, brake fluid on the cylinder body or a brake warning light can mean the master cylinder is wearing out. Before you replace it, look over the cylinder, reservoir and the area around them with the engine off for wet spots, since a leak elsewhere in the brake system can feel much the same at the pedal. The brake system has one master cylinder, and this listing is one.
This brake master cylinder fits the 1995 and 1998-1999 Nissan Pickup and the 1986-1989 and 1992-1994 Nissan D21.
Fit and size
Build and materials
One brake master cylinder with its reservoir and sensor. Mounting hardware is not included, so plan on new fasteners rather than reusing the old ones.
Interchange: 83-04318 · 100-1413 · M-51318 · 072-8562 · 072-8745 · 13-2256 · 11-2256 · 130.42311 · 131.42311 · 355-67039
18M329 · M900535 · 12290 · 12823 · 12825 · MC115590 · NM52256 · 4601001G00 · 46010C8101 · MC39593 · F115590
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the right master cylinder for the 1992-1994 Nissan D21?
Yes. Dorman M39593 fits the 1986-1989 and 1992-1994 Nissan D21, and it also fits the 1995 and 1998-1999 Nissan Pickup.
Does the Dorman brake master cylinder come with its reservoir?
Yes. Dorman M39593 includes the reservoir and the sensor. Mounting hardware is not included.
What is the Dorman master cylinder housing made of?
The housing is aluminum with a 1 in bore diameter. The rubber components are EPDM compound, made to resist glycol-based brake fluid.
What does a failing master cylinder feel like at the brake pedal?
A soft pedal, a pedal that slowly sinks, fluid around the cylinder body or a brake warning light can all be signs of a worn brake master cylinder. A shop can test the hydraulic side of the system.
What thread sizes are the outlets on Dorman M39593?
The rearward outlet is M10 x 1.0 and the secondary outlet thread diameter is M10 x 1.0. The primary outlet thread pitch is 1 mm.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.