Dorman - First Stop Brake Master Cylinder P/N:M630223
Send steady hydraulic pressure to your brakes with this 1986-1987 Chevrolet Corvette master cylinder from Dorman First Stop, part number M39621. It is a direct-fit replacement for the 1986-1987 Chevrolet Corvette, all engines. Dorman engineers it to mirror the original master cylinder's design, function, and performance on that application. It is built from new, high-quality materials and is intended to provide a safe, durable replacement when the original unit is leaking or worn.
Specifications: 0.875 in. bore diameter · 3 outlets, including an M12 x 1.0 rearward outlet and an M10 x 1.0 secondary outlet · primary outlet thread pitch of 1 mm · 2 mounting holes · single reservoir and cap included. Mounting hardware, mounting bracket, sensor, bleeder hoses, push rod, and brake booster are not included. Country of origin: Taiwan.
The master cylinder converts pedal force into fluid pressure for the brake lines. Signs it may need replacing include a soft or sinking pedal, fluid leaking at the cylinder, and a reservoir that keeps losing fluid. These symptoms can have other causes, so diagnose the system before replacing anything. If the master cylinder is the cause, this unit replaces it. Consult the vehicle service information for bench-bleeding and brake-bleeding procedures.
Interchange: 174-830 · 83-36063 · 100-3012 · M-82063 · 13-4001 · 10-4001 · 130.62063 · 355-47062
174830 · 8336063 · 1003012 · M82063 · 134001 · 104001 · 13062063 · 35547062 · 18M343 · M900549 · 12188 · MC507780 · 10052280 · M2188 · NM2188 · MC39621 · F115610 · MC115610
This part cross-references / interchanges with the following part numbers:
Is this the right master cylinder for a 1986-1987 Chevrolet Corvette?
Dorman M39621 is a direct-fit replacement for the 1986-1987 Chevrolet Corvette, all engines, engineered to match the original master cylinder's design, function, and performance.
Does it come with a reservoir and cap?
Yes, it includes a single reservoir and the master cylinder cap. Mounting hardware, a mounting bracket, a sensor, bleeder hoses, a push rod, and a brake booster are not included.
What is the housing made of?
The cylinder housing is aluminum, constructed to match the original part's housing material. All rubber components use a high-quality EPDM compound that resists glycol-based brake fluid.
What are signs a master cylinder may need replacing?
Common signs include a soft or sinking brake pedal, fluid leaking at the cylinder, or a reservoir that keeps losing fluid. These can have other causes, so diagnose the system before replacing.
Do I need to bleed the brakes after installing it?
Replacing a master cylinder opens the hydraulic system, so bleeding is generally required. Follow the vehicle service information to bench-bleed the unit and bleed the brake lines.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.