Dorman - First Stop Brake Master Cylinder P/N:M133745
Dorman M630111 brake master cylinder for the 2001-2005 Honda Civic and other vehicles turns pedal force into hydraulic pressure for the brakes. It has two outlets that carry that pressure out to the brake lines.
A brake pedal that feels soft or sinks, fluid around the cylinder, or a reservoir level that keeps dropping can mean the master cylinder is worn. Before you replace it, rule out a leak at the brake lines, hoses or calipers, because a soft pedal can come from several places in the system. A brake system has a single master cylinder, and this listing is one.
It is a direct-fit replacement for the 2001-2005 Honda Civic and the 2002-2004 Acura RSX. The housing is constructed to match the casting material of the original part for similar performance.
Fit and size
Build and materials
One master cylinder with its reservoir and sensor. Mounting hardware is not included, so plan on new fasteners, as the old ones may not be reusable.
Interchange: 83-08049 · 100-1351 · M-54049 · 072-9438 · 072-9752 · 13-2943 · 11-2943 · 130.40049 · 131.40049 · 355-59031
M901200 · M901256 · 13933 · MC511540 · 46100S5DA51 · 46100S6MA01 · 46100S6MC01 · M55129 · NM55129 · MC390722 · F140217 · F141069 · MC140217
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Dorman M630111 a master cylinder for the 2001-2005 Honda Civic?
Yes. The Dorman M630111 is listed for the 2001-2005 Honda Civic and is a direct-fit replacement for that car.
Will the Dorman M630111 work as a master cylinder for the 2002-2004 Acura RSX?
Yes. The Dorman M630111 brake master cylinder is listed for the 2002-2004 Acura RSX as a direct-fit replacement.
Does the Dorman M630111 come with the reservoir and sensor?
Yes, it comes with its reservoir and sensor; mounting hardware is not included, so plan on new fasteners.
What brake fluid are the rubber parts in this master cylinder made for?
All rubber components in this master cylinder are made of EPDM compound, which resists glycol-based brake fluid.
What are the bore size and outlet threads on this aluminum master cylinder?
The bore diameter is 0.875 inch. The rearward and secondary outlets are both M10 x 1.0, and the primary outlet thread pitch is 1 mm.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.