Dorman - First Stop Brake Master Cylinder P/N:M630047
Turn every press of the brake pedal into hydraulic braking pressure with this Kia Optima master cylinder from Dorman First Stop, part number M630192. It is a direct-fit replacement for the 1999-2005 Hyundai Sonata, 2001-2002 Kia Optima and 2002 Hyundai XG350 (engine: All), one per vehicle. It is designed to match the original master cylinder's design, function and performance on these applications, and is made from new, high-quality materials.
Specifications: 1 in. bore diameter; two outlets; M10 x 1.0 rearward outlet size; M10 x 1.0 secondary outlet thread diameter; 1 mm primary outlet thread pitch. The reservoir and sensor are included. Mounting hardware is not included, so consult the vehicle service information for the correct fasteners and whether the originals may be reused. Country of origin: China.
Signs that a master cylinder may need replacing include a soft or sinking brake pedal, fluid leaking at the master cylinder, or a steadily dropping fluid level. Other brake components can cause the same symptoms, so diagnose the system before replacing this part. Bleed the brake system after installation according to the vehicle service procedure.
Interchange: 83-16721 · 100-2032 · M-52721 · 072-9447 · 13-3302 · 11-3302 · 130.51021 · 355-03021
8316721 · 1002032 · M52721 · 0729447 · 133302 · 113302 · 13051021 · 35503021 · MC511820 · 5851038304 · M55153 · NM55153 · MC390726 · F141145 · MC141145
This part cross-references / interchanges with the following part numbers:
Which vehicles does this Hyundai Sonata brake master cylinder fit?
It is listed for the 1999-2005 Hyundai Sonata, the 2001-2002 Kia Optima and the 2002 Hyundai XG350, with engine code All and one per vehicle.
Does M630192 come with a reservoir and sensor?
Yes. The reservoir and sensor are both included. Mounting hardware is not, so check the vehicle service information for the correct fasteners.
What are the outlet and bore specifications?
It has two outlets and a 1 in. bore diameter. The rearward outlet size is M10 x 1.0, the secondary outlet thread diameter is M10 x 1.0, and the primary outlet thread pitch is 1 mm.
What are signs a master cylinder may need replacing?
Common signs include a soft or sinking brake pedal, fluid leaking at the master cylinder, or a dropping fluid level. Diagnose the brake system first, because other parts can cause these symptoms.
Do I need to bleed the brakes after installing it?
Yes. A master cylinder is typically bench-bled before installation, and the brake system is bled afterward. Follow the vehicle service procedure.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.