Dorman - First Stop Brake Master Cylinder P/N:M630623
Turn pedal force into hydraulic pressure for your brakes with the Dorman First Stop Brake Master Cylinder M630307, a direct-fit Taurus master cylinder for the 2004-2007 Ford Taurus that also fits the 2004-2005 Mercury Sable. Dorman designed it to match the design, function and performance of the original master cylinder on these vehicles, and built it from new, high-quality materials for a safe, durable replacement.
Specifications: 1 in bore diameter. Two outlets, with M10 x 1.0 secondary and rearward outlet threads and a 1 mm primary outlet thread pitch. The reservoir and sensor are included. Mounting hardware is not included, so consult the vehicle service information for the correct fasteners and whether the originals may be reused. Country of origin: China.
Signs a master cylinder may need replacing include a soft or sinking brake pedal, fluid leaking at the unit, or a brake warning light. Other brake components can cause the same symptoms, so diagnose the cause before replacing. After installation, bleed the brake system according to the service procedure.
See the Buyer's Guide tab for every listed vehicle.
Interchange: 100-3058 · 13-3048 · 10-3048 · 130.61091 · 131.61091 · 355-54117 · BRMC-21
13909 · MC512640 · 4F1Z2140AA · M4070 · NM4070 · MC390812 · F140899 · MC140899 · 1003058 · 133048 · 103048 · 13061091 · 13161091 · 35554117 · BRMC21
This part cross-references / interchanges with the following part numbers:
Is this a 2004-2007 Ford Taurus master cylinder?
It is listed for the 2004-2007 Ford Taurus, with one used per vehicle. Enter your vehicle in the Buyer's Guide tab to confirm the match before ordering.
Will it work as a 2004-2005 Mercury Sable master cylinder?
Yes. It is listed for the 2004-2005 Mercury Sable, with one used per vehicle.
Are the reservoir and sensor included?
Yes. Both the reservoir and the sensor are included. Mounting hardware is not, so check the service information for the correct fasteners and whether they can be reused.
What are the key specifications?
It has an aluminum housing, a 1 in bore and two outlets. The secondary and rearward outlet threads are M10 x 1.0, and the primary outlet thread pitch is 1 mm.
What are signs a master cylinder may need replacing?
Common signs are a soft or sinking pedal, fluid leaking at the unit, or a brake warning light. Other brake parts can cause the same symptoms, so diagnose the cause first.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.