Dorman - First Stop Brake Master Cylinder P/N:M630293
Turn every press of the brake pedal into the hydraulic pressure your brakes rely on with the Dorman First Stop Brake Master Cylinder, part number M630405. It is a direct-fit replacement for the 2008 Cadillac CTS and the 2008 Cadillac STS (engine: All), with one used per vehicle. It is precision-engineered to match the design, function, and performance of the original master cylinder on those applications.
Specifications: 1.031 in bore diameter. Two outlets: the rearward and secondary outlets are M13 x 1.5, and the primary outlet has a 1.5 mm thread pitch. The reservoir and a sensor are included, but mounting hardware is not. Country of origin: China.
Signs a master cylinder may need replacing include a soft brake pedal, a pedal that slowly sinks under steady pressure, or brake fluid leaking from the master cylinder. Other brake components can cause similar symptoms, so diagnose the cause before replacing. Because mounting hardware is not included, consult the vehicle service information for the correct fasteners and whether the originals may be reused. Bleed the brake system as the service procedure directs.
Interchange: 100-4048 · 10-3354 · 130.62153
15267509 · R135113 · 1004048 · 103354 · 13062153
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Which vehicles does the Dorman M630405 fit?
It is listed for the 2008 Cadillac CTS and the 2008 Cadillac STS (engine: All), with one master cylinder used per vehicle. See the "Vehicles it fits" section for details.
Does it come with a reservoir and sensor?
Yes. The reservoir and a sensor are both included. Mounting hardware is not included.
What is the master cylinder made of?
The housing is aluminum, built to match the casting material of the original part. The rubber components use a high-quality EPDM compound that resists glycol-based brake fluid.
What are the bore and outlet specifications?
The bore diameter is 1.031 in and there are two outlets. The rearward and secondary outlets are M13 x 1.5, and the primary outlet has a 1.5 mm thread pitch.
What are signs a brake master cylinder may need replacing?
A soft or sinking brake pedal, or brake fluid leaking from the master cylinder, can be signs it may need replacing. Other brake parts can cause similar symptoms, so diagnose the cause first.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.