Dorman - First Stop Brake Master Cylinder P/N:M630623
When a leaking or worn Suzuki Vitara master cylinder needs replacing, the Dorman First Stop Brake Master Cylinder M630435 is designed to convert your pedal effort into hydraulic pressure for the brakes just like the original. It is a direct-fit replacement for the 1999-2001 Chevrolet Tracker and the 1999-2001 Suzuki Vitara (Engine: All), with one master cylinder used per vehicle.
Dorman precision-engineers this brake master cylinder so its design, function and performance match the original unit on the listed vehicles, and builds it from new, high-quality materials for a durable replacement.
Specifications: 0.938-inch bore diameter, 4 outlets, M10 x 1.0 rearward and secondary outlet threads, and a 1 mm primary outlet thread pitch. The reservoir and a sensor are included. Mounting hardware is not included, so consult the vehicle service information for the correct fasteners and whether the originals may be reused.
Signs a master cylinder may need replacing include a spongy or slowly sinking brake pedal, fluid leaking at the cylinder, or a reservoir level that keeps dropping. Diagnose the brake system first, because other components can cause similar symptoms. Bleed the brakes as the service procedure directs.
Country of origin: Taiwan.
Interchange: 100-3848 · 10-3076 · 130.48020 · 355-47011
1003848 · 103076 · 13048020 · 35547011 · 91174780 · M55114 · NM55114 · MC391104 · 5110068D00 · F144043 · MC144043
This part cross-references / interchanges with the following part numbers:
Which vehicles does the Dorman M630435 fit?
It is listed for the 1999-2001 Chevrolet Tracker and the 1999-2001 Suzuki Vitara (Engine: All). Each vehicle uses one master cylinder.
Is the reservoir included with this master cylinder?
Yes, the M630435 includes the reservoir and a sensor. Mounting hardware is not included, so consult the vehicle service information for the correct fasteners.
What are signs a brake master cylinder may need replacing?
Common signs include a spongy or sinking brake pedal, fluid leaking at the cylinder, or a dropping reservoir level. Diagnose the system first, because other brake components can cause similar symptoms.
What are the bore and outlet specifications?
It has a 0.938-inch bore diameter and 4 outlets. The rearward and secondary outlets use M10 x 1.0 threads, and the primary outlet thread pitch is 1 mm.
Are its rubber components resistant to glycol-based brake fluid?
Yes, all of its rubber components are made of a high-quality EPDM compound for resistance to glycol-based brake fluid. Use the fluid type your vehicle's manufacturer specifies.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.