Dorman - First Stop Brake Master Cylinder P/N:M630759
Turn every press of the pedal into hydraulic pressure for the brakes with the Dorman First Stop Brake Master Cylinder M630441. It is a direct-fit replacement for the 2006-2008 Buick Lucerne and 2006-2008 Cadillac DTS (All engines). Dorman precision-engineered it to mirror the original master cylinder's design, function and performance on those vehicles.
Specifications: 1-inch bore with two outlets. The secondary outlet thread is M13 x 1.5 and the primary outlet thread pitch is 1.5 mm. The reservoir and sensor are included. Mounting hardware is not included, so consult the vehicle service information for the correct fasteners and whether the originals may be reused. Country of origin: China.
Signs this part may need replacing: a spongy or slowly sinking brake pedal, fluid seeping from the master cylinder, a dropping fluid level, or an illuminated brake warning light. Other brake faults can cause these symptoms, so diagnose the system first. If the master cylinder is the cause, this unit replaces it. Follow the service procedure, including bleeding the brake system, when installing.
Interchange: 174-1134 · 100-2353 · 13-3282 · 13-3282A · 130.62141 · 355-45020
1741134 · 1002353 · 133282 · 133282A · 13062141 · 35545020 · 15283583 · 19209200 · M4087 · M4088 · NM4087A · NM4088 · MC391079 · F142296 · MC142296
This part cross-references / interchanges with the following part numbers:
Which vehicles does the Dorman M630441 fit?
It is listed for the 2006-2008 Buick Lucerne and the 2006-2008 Cadillac DTS, All engines, with one master cylinder per vehicle.
Does it come with a reservoir and sensor?
Yes, the reservoir and sensor are both included. Mounting hardware is not included, so consult the vehicle service information for the correct fasteners and whether the originals may be reused.
What is this master cylinder made of?
The master cylinder is aluminum. Its rubber components use a high-quality EPDM compound for resistance to glycol-based brake fluid.
What are the bore and outlet specifications?
It has a 1-inch bore and two outlets. The secondary outlet thread is M13 x 1.5 and the primary outlet thread pitch is 1.5 mm.
What are signs a brake master cylinder may need replacing?
Common signs are a spongy or sinking pedal, fluid leaking at the cylinder, or a brake warning light. Other brake faults can cause these too, so diagnose the system before replacing the cylinder.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.