Dorman - First Stop Brake Master Cylinder P/N:M630623
If a worn or leaking master cylinder is the problem, the Dorman First Stop Brake Master Cylinder M630866 is a new replacement that converts the force on your brake pedal into hydraulic pressure for the brake system. It fits many vehicles, among them the 2006-2010 Volkswagen Passat, 2009-2017 Volkswagen Tiguan and 2015-2019 Audi Q3. See the Buyer's Guide tab for the full list. Dorman designs this master cylinder to match the design, function and performance of the original unit on the listed applications, and builds it from new, high-quality materials for a safe, durable replacement.
Specifications: 0.938 in bore diameter, two outlets, M12 x 1.0 secondary and rearward outlet threads, and a 1 mm primary outlet thread pitch. The package contains the master cylinder only. The reservoir, sensor and mounting hardware are not included, so transfer or replace them as the vehicle service procedure directs. Consult the service information for the correct fasteners and whether they may be reused, and bleed the brake system after installation. Country of origin: China.
Interchange: 100-4083 · 13-3500 · 11-3500 · 130.33131 · 355-74009
1004083 · 133500 · 113500 · 13033131 · 35574009 · NM55534 · MC391414 · 3C1614019C · 3C1614019E · R135275
This part cross-references / interchanges with the following part numbers:
Is this the right Passat master cylinder for my 2006-2010 Volkswagen Passat?
Yes. M630866 is listed as a direct-fit replacement for the 2006-2010 Volkswagen Passat. The Buyer's Guide tab shows every vehicle it fits.
Will this Tiguan master cylinder also fit a 2015-2019 Audi Q3?
It is listed for both the 2009-2017 Volkswagen Tiguan and the 2015-2019 Audi Q3. Check the Buyer's Guide tab to confirm the fitment for your vehicle.
Does it come with a reservoir, sensor or mounting hardware?
No. The package contains the master cylinder only. Transfer or replace the reservoir, sensor and fasteners as the vehicle service procedure directs.
What are the main specifications?
It has an aluminum housing, a 0.938 in bore and two outlets, with M12 x 1.0 secondary and rearward outlet threads and a 1 mm primary thread pitch. Its rubber parts use EPDM compound to resist glycol-based brake fluid.
What are signs a brake master cylinder may need replacing?
A soft or sinking pedal, fluid leaking at the master cylinder or a dropping fluid level are signs it may need replacing. Other brake parts cause similar symptoms, so diagnose the system first.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.