Dorman - First Stop Brake Master Cylinder P/N:M39403
Dorman M631032 brake master cylinder for the 2015-2020 Ford Edge and other vehicles turns pedal force into hydraulic pressure for the brakes. It is precision-engineered to follow the design, function and performance of the original master cylinder on specific years, makes and models.
A soft or sinking brake pedal, fluid leaking near the cylinder or a brake warning light can mean a worn master cylinder. A leaking brake hose could produce the same pedal feel, so a pedal symptom alone does not prove this part is the problem.
Dorman M631032 is a direct-fit replacement for the 2015-2020 Ford Edge, the 2019-2020 Lincoln Nautilus and the 2015-2018 Lincoln MKX; a single master cylinder goes on each.
Fit and size
Build and materials
One master cylinder with its reservoir, cap and sensor. Mounting hardware, a mounting bracket, bleeder hoses, a push rod and a brake booster are not included, so plan on new fasteners rather than reusing the old ones.
Interchange: 100-4133 · 10-3310 · 13-3310 · 130.61132
F2GZ2140A · NM4322 · MC391512
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does Dorman M631032 work as a 2015-2020 Ford Edge master cylinder replacement?
Yes. Dorman M631032 fits the 2015-2020 Ford Edge, and each one takes a single master cylinder.
Will this 2015-2020 Ford Edge master cylinder fit the 2015-2018 Lincoln MKX too?
Yes. Dorman M631032 also fits the 2015-2018 Lincoln MKX, in addition to the 2015-2020 Ford Edge.
Does this master cylinder come with the reservoir and cap?
Yes. The listing is one master cylinder with its reservoir, cap and sensor. Mounting hardware, a bracket, bleeder hoses, a push rod and a brake booster are not included.
What is the bore size and outlet thread on this master cylinder?
The bore diameter is 1.063 in. Both outlets use an M14 x 1.5 mm thread, and the cylinder has two outlets.
Do the rubber components in this master cylinder resist glycol-based brake fluid?
Yes. All rubber components are made of a high-quality EPDM compound for resistance to glycol-based brake fluid, and the housing is aluminum.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.