Sold out
Dorman - First Stop Clutch Master Cylinder P/N:CM640102
$129.99
Generate the hydraulic pressure that disengages your clutch with the Dorman - First Stop Clutch Master Cylinder CM640102. It installs as a direct-fit replacement for the 2006-2011 Chevrolet HHR, taking the place of a worn or leaking original clutch master cylinder.
In a manual-transmission hydraulic clutch system, the master cylinder is the pedal end of the circuit: pressing the clutch pedal pushes its piston, sending fluid pressure through the line to the slave cylinder so the clutch can be disengaged for shifting.
- Hydraulic actuation: converts clutch-pedal effort into the fluid pressure used to disengage the clutch.
- Direct-fit replacement: designed to replace the original clutch master cylinder on the listed application.
- Signs this part may need replacing: a soft or spongy clutch pedal, a pedal that sinks toward the floor, trouble shifting gears, or hydraulic fluid seepage. If a failed master cylinder is the cause, this replaces it; diagnose the system first, as these symptoms can also come from the slave cylinder, line, or low fluid.
Interchange: 136.62043 · 24231367 · 24245535 · LMC484 · CM143039 · F143039
Manufacturer part number CM640102.
This part cross-references / interchanges with the following part numbers:
136.62043, 24231367, 24245535, LMC484, CM143039, F143039
Frequently Asked Questions
What vehicle does the CM640102 fit?
It is a direct-fit clutch master cylinder for the 2006-2011 Chevrolet HHR. Check the Buyer's Guide tab to confirm it matches your specific vehicle.
What does a clutch master cylinder do?
It sits at the clutch pedal and converts your pedal effort into hydraulic pressure, which travels through the line to the slave cylinder to disengage the clutch for shifting.
What are signs my clutch master cylinder may be failing?
A soft or spongy clutch pedal, a pedal that sinks to the floor, difficulty shifting, or hydraulic fluid seepage. Diagnose the system, since these can also stem from other parts.
Which part numbers does this replace?
It interchanges with 136.62043, 24231367, 24245535, LMC484, CM143039, and F143039. Its own manufacturer part number is CM640102.
Do I need to bleed the system after installing it?
A hydraulic clutch system generally needs to be bled after replacing a component. Follow the vehicle service information for the correct bleeding procedure and fluid.
Write a Review
Dorman
Dorman - First Stop Clutch Master Cylinder P/N:CM640102
Related Products