Dorman - First Stop Clutch Master Cylinder P/N:CM640117
Dorman CM640200 clutch master cylinder for the 2000 Volvo VNL 6-cylinder 10.5L or 14.6L, the 2000-2001 VNL 6-cylinder 12.7L, the 2000-2002 VNL 6-cylinder 11.1L or 14.0L, the 2000-2003 VNL 6-cylinder 10.8L, the 2000-2005 VNL 6-cylinder 12.1L or 14.9L, the 2003 VNL 6-cylinder 12.7L and other vehicles turns pedal force into hydraulic pressure that releases the clutch. This Dorman clutch master cylinder is a direct replacement made to match the original unit in specific vehicles.
A clutch pedal that feels soft or sinks, fluid around the cylinder, or hard shifting can point to a failing clutch master cylinder. Before you replace it, rule out the slave cylinder, the hydraulic line and air in the system, since any of them can also leave the pedal feeling soft.
This cylinder is listed for a wide range of Volvo models, including the 2000-2001 Volvo VNM 6-cylinder 12.7L, the 2000-2002 VNM 6-cylinder 11.1L or 14.0L, the 2000-2003 VNM 6-cylinder 10.8L, the 2000-2005 VNM 6-cylinder 12.1L and the 2003 VNM 6-cylinder 12.7L, as well as the 2001-2003 Volvo VHD 6-cylinder 10.8L, the 2001-2005 VHD 6-cylinder 12.1L and the 2004-2005 VHD 6-cylinder 8.9L. If your Volvo is not named here, find its year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
One clutch master cylinder, and each vehicle takes one. The reservoir is not included, and the cylinder is not pre-bled or pre-filled.
Interchange: 8085690
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this Volvo VNL clutch master cylinder right for the 2000-2005 Volvo VNL 6-cylinder 12.1L?
Yes. Dorman CM640200 is listed for the 2000-2005 Volvo VNL 6-cylinder 12.1L, and that vehicle takes one cylinder.
Does the Dorman CM640200 come with a reservoir?
No. The Dorman CM640200 box holds one clutch master cylinder; the reservoir is not included, and the cylinder is not pre-bled or pre-filled.
What thread size does the outlet on this clutch master cylinder use?
The outlet thread is M12 x 1.5, and the cylinder has a 1-1/8 in inside diameter. It is an external-type cylinder made of cast iron.
Could a soft clutch pedal mean the clutch master cylinder needs replacing?
It can. A soft or sinking pedal, fluid around the cylinder or hard shifting may come from the master cylinder, and a shop can test the hydraulic system to find the cause.
Is Dorman CM640200 the same part as number 8085690?
Yes. 8085690 is a listed interchange number for the Dorman CM640200 clutch master cylinder.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.