Dorman - First Stop Clutch Slave Cylinder P/N:CS650141
Dorman CS37918 clutch slave cylinder for the 1990-1994 Plymouth Laser 4-cylinder 1.8L or 2.0L and other vehicles uses hydraulic pressure to disengage the clutch. This Dorman clutch slave cylinder is a direct replacement, reverse-engineered from the original to match it in specific vehicles.
Fluid around the clutch housing, a soft or sinking clutch pedal or trouble getting into gear can mean the slave cylinder is failing. Before you replace it, rule out a leaking clutch master cylinder or line and a worn clutch, since those can also produce a soft pedal or hard shifting. The clutch needs one slave cylinder, so a single unit covers the car.
This slave cylinder is listed for a wide range of Plymouth, Eagle and Mitsubishi models, led by the 1990-1994 Eagle Talon 4-cylinder 2.0L, the 1993-1994 Talon 4-cylinder 1.8L and the 1990-1994 Mitsubishi Eclipse 4-cylinder 1.8L or 2.0L.
Fit and size
Build and materials
One clutch slave cylinder.
Interchange: CRM-005 · S-52009 · 072-8863 · 138.46009
18F119 · S0509 · W909145 · 12655 · SC250350 · LSC146 · CS2105 · MD733623 · 37918 · SH6138
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this clutch slave cylinder right for a 1990-1994 Mitsubishi Eclipse 4-cylinder 1.8L or 2.0L?
Yes. Dorman CS37918 is listed for the 1990-1994 Mitsubishi Eclipse with either the 4-cylinder 1.8L or 2.0L engine. If your car is a different model, look it up in the "Vehicles it fits" section on this product page.
Is anything besides the cylinder included with the Dorman slave cylinder?
No. The Dorman CS37918 package holds a single clutch slave cylinder, and no other parts are listed with it.
What is the inside diameter of this clutch slave cylinder?
The inside diameter is 0.75 in. This is an external-type slave cylinder, sold as a standard replacement grade.
Can this clutch slave cylinder be used with standard brake fluid?
Yes. Its rubber components are made for compatibility with standard brake fluid.
How can I tell if my clutch slave cylinder is leaking?
Wet fluid near the clutch housing or a clutch pedal that feels soft or sinks can mean the slave cylinder is leaking. A shop can test the hydraulic system to confirm the cause.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.