Dorman - HD Solutions Diesel Injection Control Pressure Sensor P/N:904-7508
Dorman 904-7502 diesel injection control pressure sensor for the 1998 International 4700 4-cylinder 8.5L or 6-cylinder 14.6L, the 1998-2002 4700 V8 7.3L, the 1998-2003 4700 6-cylinder 8.7L, the 1998-2004 4700 6-cylinder 7.6L, the 1999 4700 6-cylinder 11.1L, the 2000-2001 4700 6-cylinder 6.7L or 4-cylinder 8.5L, the 2001 4700 6-cylinder 11.1L and other vehicles measures injection control pressure and reports it to the control module. This Dorman diesel injection control pressure sensor helps the ECM get the information it needs to keep a diesel running smoothly.
A diesel that idles rough, misfires or stalls may have a sensor problem. If this sensor is the cause, this unit replaces it. Those signs have many sources, so with the engine off and cool, look over the sensor, its connector and the wiring for cracks, oil or corrosion before you buy.
It is listed for a wide range of International models, including the 1998-2004 International 4900 6-cylinder 7.6L or 8.7L, the 1999 4900 6-cylinder 10.0L, the 1999-2002 4900 4-cylinder 8.5L, the 2000 4900 6-cylinder 10.8L or 14.6L, the 2001 4900 6-cylinder 12.0L or 12.7L, and the 2002 International 4400 4-cylinder 8.5L, the 2002-2004 4400 6-cylinder 7.6L or 8.7L, the 2003 4400 V8 6.0L and the 2004 4400 6-cylinder 9.3L. It is a direct replacement for these vehicles, matching the original equipment sensor in fit, function and performance. This listing is one sensor, and the engine takes one.
Fit and size
Build and materials
One diesel injection control pressure sensor.
Interchange: 577.55610999999999 · 577.55611 · 1006-1003
ISK939 · 1830669C91 · 1830669C92 · 1833031C1 · ICP106
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Dorman 904-7502 sensor made for the 1998-2004 International 4900 6-cylinder 7.6L or 8.7L?
Yes. Dorman 904-7502 is listed for the 1998-2004 International 4900 6-cylinder 7.6L or 8.7L. For another model or engine, find your vehicle in the "Vehicles it fits" section on this product page.
Is the 904-7502 sold as a single sensor?
Yes. Dorman 904-7502 is one sensor, and the package contains only that sensor. The engine takes one.
What kind of connector does this injection control pressure sensor have?
It has a round, female factory-style electrical connector with three terminals. The terminals are male pins.
Can a bad injection control pressure sensor make a diesel idle rough or stall?
Yes, it can be one source, because the control module relies on the sensor's signal. Other faults produce those symptoms too, so a shop can test the circuit and the sensor.
What testing does this Dorman HD Solutions sensor go through?
This sensor went through try-on and material testing, aimed at a quality fit and long service life.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.