Dorman - OE Solutions Center High Mount Stop Light P/N:923-265
Give your truck's third brake light a longer-lasting LED upgrade with the Dorman center high mount stop light, part number 923-109. This OE FIX assembly is a direct-fit replacement for the 2004-2012 Chevrolet Colorado and 2004-2012 GMC Canyon. It swaps the factory halogen-bulb design for an LED bulb and is designed to match the look and fit of the original on these trucks.
The center high mount stop light sits high and centered at the rear of the vehicle. It lights up whenever the brakes are applied, giving following drivers an extra warning. On the original assembly, the halogen bulb typically fails after an average of only 2,000 hours of use. The LED bulb in this assembly is rated to last an average of 22 years, which is intended to cut future maintenance costs.
Signs this part may need replacing include a third brake light that stays dark, flickers or glows dimly when the brakes are pressed. Diagnose the circuit before replacing the light, because wiring or brake switch faults can cause the same symptoms.
Interchange: 15286506 · 19418142 · 25821852 · 25971002 · 97247013 · BTL139
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Which trucks does Dorman 923-109 fit?
It is a direct-fit replacement for the 2004-2012 Chevrolet Colorado and the 2004-2012 GMC Canyon. Check the "Vehicles it fits" section to confirm it fits your vehicle.
What does a center high mount stop light do?
It is the third brake light, mounted high and centered at the rear of the vehicle. It lights up when the brakes are applied to give following drivers an extra warning.
How does the LED bulb compare with the original halogen bulb?
The original halogen bulb typically fails after an average of only 2,000 hours of use. The LED bulb in this assembly is rated to last an average of 22 years.
What are signs the third brake light may need replacing?
A third brake light that stays dark, flickers or looks dim when you brake may point to a failed assembly. Check the wiring and brake switch first, because they can cause the same symptoms.
Will it look like the original third brake light?
It is designed to directly match the look and fit of the original third brake light assembly, and it has been vehicle try-on tested.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.