Dorman - OE Solutions Center High Mount Stop Light P/N:923-288
Replace a dark, cracked or faded third brake light with the Dorman center high mount stop light, part number 923-206. This assembly lights when you press the brake pedal to signal the drivers behind you, and it is designed to look and work like the original. It fits many vehicles, among them the 1995-2003 Ford Ranger, 1999-2016 Ford F-250 Super Duty and 1999-2016 Ford F-350 Super Duty. See the "Vehicles it fits" section for the full list of applications and engine details.
Need a new third brake light assembly without going back to the dealership? Dorman reverse-engineered this replacement to match the stock center high mount stop light on specific vehicles.
Signs the third brake light may need replacing include a lamp that stays dark when the brakes are applied, a cracked or broken lens, or moisture inside the housing. A dark light can also come from the wiring or the brake light circuit, so check those first. If the light assembly itself has failed, this assembly replaces it.
Interchange: CC3Z13A613B · YC3Z13A613BA · S67008
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What does a center high mount stop light do?
It is the third brake light. It sits at the center of the vehicle, higher than the tail lamps, and lights up when the brakes are applied to signal the drivers behind you.
Will this Dorman third brake light fit my 1995-2003 Ford Ranger?
It is listed for the 1995-2003 Ford Ranger, the 1999-2016 Ford F-250 Super Duty and the 1999-2016 Ford F-350 Super Duty, among many others. Check the "Vehicles it fits" section for your exact vehicle.
Does it look like the original light?
Yes. It was reverse-engineered to match the stock center high mount stop light and is designed to look and function like the original on the listed applications.
What are signs a third brake light needs replacing?
A lamp that stays dark when braking, a cracked lens or moisture inside the housing may point to a problem. Check the wiring and the brake light circuit first, since a dark light can have other causes.
Has this part been tested?
Yes. It has undergone extensive testing intended to help ensure a secure fit and long service life.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.