Dorman - OE Solutions Center High Mount Stop Light P/N:923-400
Replace a cracked, dim or failed third brake light with the Dorman center high mount stop light, part number 925-602, a direct-fit replacement for the 2007-2011 Ford Edge and 2007-2011 Lincoln MKX. Dorman reverse-engineered this assembly from the stock center high mount stop light, so it is designed to look, fit and perform like the original, with no trip back to the dealership. See the "Vehicles it fits" section for engine and trim details.
The center high mount stop light comes on with the rear brake lights when you press the brake pedal. Mounted higher than the main brake lamps, it gives drivers behind you an extra warning that the vehicle is slowing. Signs the assembly may need replacing include a cracked or faded lens, moisture inside the housing, or a light that is dim or does not come on. A blown fuse or a wiring fault can also keep the light from working, so diagnose the circuit before you replace the assembly. If the original light is the cause, the 925-602 replaces it.
Interchange: 7T4Z13A613A · 8T4Z13A613A
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Which vehicles does the Dorman 925-602 fit?
It is a direct-fit replacement for the 2007-2011 Ford Edge and 2007-2011 Lincoln MKX. The "Vehicles it fits" section has the full fitment chart.
Is a center high mount stop light the same as a third brake light?
Yes. The center high mount stop light is commonly called the third brake light. It is the extra brake lamp mounted above the main rear brake lights.
What does this light do?
It lights up with the other brake lights when the brakes are applied. This gives following drivers a higher-mounted warning that the vehicle is slowing or stopping.
What are signs my third brake light may need replacing?
Common signs are a cracked or faded lens, moisture inside the housing, or a light that is dim or stays out. If the light is out, check the fuse and wiring first, since those can also keep it from working.
Which part numbers does the 925-602 replace?
It cross-references to 7T4Z13A613A and 8T4Z13A613A. Dorman designed it to look and function like the original center high mount stop light on the listed applications.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.