Dorman - OE Solutions Drive Shaft P/N:966-440
Dorman 966-487 rear drive shaft for the 2020-2025 Chevrolet Silverado 2500 HD and other vehicles carries engine torque to the rear axle. This Dorman drive shaft is a two-piece steel assembly with a slip yoke that lets its overall length adjust.
A vibration that rises with speed or a clunk when you shift can mean worn U-joints or a damaged shaft, though tires, wheels and other driveline parts cause similar symptoms. Check the tires for damage or uneven wear first, and have a shop test the driveline before you replace the shaft.
This rear drive shaft is a direct-fit replacement for a wide range of Chevrolet and GMC models, led by the 2020-2025 Chevrolet Silverado 3500 HD and the 2020-2025 GMC Sierra 2500 HD, and each takes one. Not seeing your model? Look it up in the "Vehicles it fits" section.
Fit and size
Build and materials
One drive shaft with its universal joints. CV joints and an axle nut are not included.
Interchange: 84042519 · 84866115 · 85521116 · 85521120
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Dorman 966-487 drive shaft right for the 2020-2025 GMC Sierra 2500 HD?
Yes, Dorman 966-487 is a direct-fit rear drive shaft for the 2020-2025 GMC Sierra 2500 HD and the 2020-2025 Chevrolet Silverado 3500 HD, one per vehicle; other models are in the "Vehicles it fits" section.
Does the Dorman OE Solutions drive shaft come with CV joints or an axle nut?
No. The listing is one rear drive shaft with its universal joints, and CV joints and an axle nut are not included.
How long is this rear drive shaft when collapsed?
Dorman 966-487 measures 96.5 in collapsed, flange face to flange face, and its drive shaft length is 97.5 in. The shaft diameter is 3.5 in with a 0.095 in wall.
Can a worn U-joint on a rear drive shaft cause a clunk when I shift?
Yes, it can: a clunk when you shift or accelerate, or a vibration that grows with speed, can come from worn U-joints or a damaged shaft, and a shop can inspect both.
Is this rear drive shaft phased, and does it have a slip yoke?
Yes, this Dorman shaft is phased at 90 degrees and has a slip yoke on one end and a bolt-on end on the other, with 1 in of max slip.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.