Dorman - OE Solutions Drive Shaft P/N:976-190
Dorman 976-153 rear drive shaft for the 1984-1989 Ford F-150 sends engine torque from the transmission toward the rear axle. This Dorman drive shaft is a two-piece steel assembly.
A vibration at road speed or a clunk when you take off can mean a worn drive shaft, though out-of-balance tires or a worn U-joint can feel much the same. Before you replace the drive shaft, have those other sources ruled out; if a failed drive shaft is the cause, this assembly replaces it.
This is a direct-fit replacement for the 1984-1989 Ford F-150, which takes one.
Fit and size
Build and materials
One drive shaft. CV joints and an axle nut are not included.
Interchange: E4TZ4R602A
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Dorman 976-153 F-150 drive shaft fit a 1984-1989 Ford F-150?
Yes. Dorman 976-153 is a rear drive shaft for the 1984-1989 Ford F-150, and that application takes one.
Does the Dorman 976-153 come with CV joints or an axle nut?
No. Dorman 976-153 is one drive shaft assembly, and CV joints and an axle nut are not included.
Is the Dorman OE Solutions drive shaft greaseable?
Yes. This drive shaft is greaseable, with a slip yoke at one end and a universal joint at the other.
How long is this two-piece rear drive shaft, and is the length adjustable?
Overall length is 74.875 in, and it is adjustable. The shaft has a 3 in diameter and a 0.083 in wall.
Does this drive shaft arrive assembled and balanced?
Yes. This drive shaft arrives fully assembled and dynamically pre-balanced, ready to install.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.