Dorman - OE Solutions Engine Air Intake Hose P/N:696-326
Dorman 696-076 air intake hose for the 2001 Ford Ranger V6 3.0L carries intake air to the engine. This Dorman intake hose is designed as a direct replacement for the original hose.
With the engine off and cool, look for a crack, tear or soft collapsed spot on the engine air intake hose, or a loose fit at the clamps. A rough idle or low power alone does not prove the hose is the problem, since a failing sensor can do the same.
This is an intake hose for the 2001 Ford Ranger V6 3.0L, tested for proper fit, and the engine takes one hose.
Fit and size
Build and materials
One air intake hose and two clamps.
Interchange: 1L5Z9B659BA
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Dorman 696-076 fit the 2001 Ford Ranger V6 3.0L?
Yes. Dorman 696-076 is listed for the 2001 Ford Ranger V6 3.0L, and that engine takes one hose.
Do Dorman air intake hoses like this one come with clamps?
Yes. Dorman 696-076 comes with two clamps and one air intake hose.
How long is this air intake hose and what is its inside diameter?
This air intake hose is 23.5 inches long, with a 3 inch inside diameter and a 2.75 inch outside diameter.
What should I look for on a rubber air intake hose that may be failing?
With the engine off and cool, look for cracks, tears, soft spots or a loose fit at the clamps. A shop can test for air leaks while the engine runs.
Does this molded air intake hose have an emissions sensor port?
No. Dorman 696-076 is a one-piece molded rubber hose without an emissions sensor port.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.