Dorman - OE Solutions Engine Coolant Overflow Hose P/N:626-747
Dorman 626-731 upper coolant overflow hose for the 2015-2016 Ford F-250 Super Duty V8 6.7L and other vehicles carries overflow coolant through a molded assembly. Original equipment hose assemblies often fail from cracks in the plastic T-connector. It is also listed as an engine coolant overflow hose.
Cracks at the T-connector, wet spots or coolant residue on the hose can mean it needs replacing, though a falling coolant level can have other causes. With the engine off and cool, look the hose and connector over first. If you see damage there, this hose is the one to replace.
It is a direct-fit replacement for several Ford Super Duty trucks, including the 2015-2016 Ford F-350 Super Duty V8 6.7L and the 2015-2016 Ford F-450 Super Duty V8 6.7L. The 2015-2016 Ford F-250 Super Duty V8 6.7L takes one hose. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One coolant overflow hose. Clamps, a heat shield and a protective sleeve are not included, so plan on new clamps.
Interchange: FC3Z8075A
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does Dorman 626-731 fit the 2015-2016 Ford F-250 Super Duty V8 6.7L?
Yes. Dorman 626-731 is an upper coolant overflow hose listed for the 2015-2016 Ford F-250 Super Duty V8 6.7L. The "Vehicles it fits" section shows the other trucks it suits.
Does Dorman 626-731 come with clamps?
No. Dorman 626-731 is one coolant overflow hose. Clamps, a heat shield and a protective sleeve are not included, so plan on new clamps.
What is the T-connector made of on this overflow hose?
The T-connector is aluminum, used in place of the plastic one that often cracks on original assemblies. The hose itself is rubber.
How can I tell if my coolant overflow hose is cracked?
With the engine off and cool, look for cracks at the T-connector, wet spots or swollen areas along the hose. A shop can pressure-test the cooling system if you are unsure.
What size are the ends and the pressure rating of this three-branch hose?
Each end has a 0.35 in inside diameter and a 0.62 in outside diameter. The hose is 108 in long with a maximum working pressure of 100 PSI.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.