Dorman - OE Solutions Engine Coolant Reservoir P/N:603-002
Dorman 603-759 coolant reservoir for the 2010-2013 Land Rover LR4 V8 5.0L, the 2014-2016 LR4 V6 3.0L and other vehicles holds engine coolant in a pressurized tank closed by a spring-loaded twist cap. Also called a coolant tank, it gives heated coolant room to expand and keeps extra coolant on hand for the cooling system.
Cracks, coolant seepage around the tank or a low-coolant warning can mean the reservoir has failed. Before you replace it, rule out a leaking hose or a worn cap, since either can lose coolant too. This listing is one reservoir, and the cooling system takes one.
It fits the 2010-2013 Land Rover LR4 V8 5.0L and the 2014-2016 LR4 V6 3.0L, the 2006-2009 Land Rover Range Rover Sport V8 4.2L or 4.4L and the 2010-2013 Range Rover Sport V8 5.0L, and the 2005-2009 Land Rover LR3 V6 4.0L or V8 4.4L.
Fit and size
Build and materials
One coolant reservoir, one cap and one level sensor. Mounting hardware and mounting brackets are not included, so plan on new hardware rather than reusing the old pieces.
Interchange: ?APET0020 · URO-011472
LR010965 · LR013663 · LR020367 · PCF500014 · PCF500015 · PCF500110 · PCJ500030 · 2411203 · CRT140000S · 996180 · EPK0127 · V480162
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is Dorman 603-759 an LR3 coolant reservoir for the 2005-2009 Land Rover LR3 V6 4.0L or V8 4.4L?
Yes. Dorman 603-759 fits the 2005-2009 Land Rover LR3 with the V6 4.0L and with the V8 4.4L, and this listing is one reservoir for either engine.
Will this Range Rover Sport coolant reservoir fit the 2010-2013 Land Rover Range Rover Sport V8 5.0L?
Yes. Dorman 603-759 fits the 2010-2013 Range Rover Sport V8 5.0L, and it also fits the 2006-2009 Land Rover Range Rover Sport V8 4.2L or 4.4L.
Does the Dorman coolant reservoir come with the cap and level sensor?
Yes. The reservoir includes its cap and a level sensor. Mounting hardware and mounting brackets are not included.
What is the cap pressure rating on the Dorman OE Solutions plastic coolant reservoir?
The cap is a spring-loaded twist type with a maximum pressure rating of 29 psi. The plastic tank holds 1.5 L of coolant.
How can I check this plastic coolant reservoir for cracks or leaks?
With the engine off and cool, look the tank over for cracks, wet-looking seams and dried coolant residue. A shop can pressure-test the cooling system if you cannot find the source.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.