Dorman - OE Solutions Engine Harmonic Balancer P/N:594-120
Dorman 594-137 harmonic balancer for the 1987-1993 Jeep Wrangler 4-cylinder 2.5L and other vehicles absorbs engine vibration on the crankshaft. This Dorman harmonic balancer, also called an engine harmonic balancer, is a cast iron assembly with a rubber bond.
A cracked, split or separated rubber ring, or a wobbling pulley and vibration at the front of the engine, can mean the balancer is worn. Before replacing it, look the rubber over with the engine off and cool, since a belt or pulley problem can give similar symptoms.
This direct replacement harmonic balancer also fits the 1984-1990 Jeep Cherokee 4-cylinder 2.5L and the 1986-1990 Jeep Comanche 4-cylinder 2.5L, and every one of them takes a single balancer.
Fit and size
Build and materials
One harmonic balancer and one instruction sheet. The bolt and washer and the mounting hardware are not included, so plan on a new bolt and washer rather than reusing old ones.
Interchange: PC-4016 · P-AMC2.5
102002 · J3242856 · J3242857 · J3242885 · J3242886 · PB1482N · DA240
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a harmonic balancer for the 1987-1993 Jeep Wrangler 4-cylinder 2.5L?
Yes. Dorman 594-137 fits the 1987-1993 Jeep Wrangler 4-cylinder 2.5L. If your car is a different one, look for it in the "Vehicles it fits" section on this page.
Does the Dorman 594-137 come with a bolt and washer?
No. The box holds one harmonic balancer and one instruction sheet. The bolt and washer and the mounting hardware are not included.
Is this harmonic balancer made of cast iron?
Yes. The body is cast iron, with a keyway and degree markings, and it is listed for a serpentine drive belt.
How can I tell if the rubber bond on this balancer is going bad?
With the engine off and cool, look for cracked, split or separated rubber between the hub and the outer ring. Vibration or a wobbling pulley while driving can also point to it, and a shop can confirm.
Does this balancer interchange with part number PC-4016?
Yes. PC-4016 is one of the numbers on the Interchange line for Dorman 594-137, along with P-AMC2.5 and several others.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.