Dorman - OE Solutions Engine Harmonic Balancer P/N:594-002
Dorman 594-158 harmonic balancer for the 1968-1977 Pontiac Firebird V8 5.7L, the 1968-1979 Firebird V8 6.6L, the 1971-1976 Firebird V8 7.5L and other vehicles absorbs engine vibration at the crankshaft. This Dorman harmonic balancer is a direct replacement that matches the original balancer in fit and function.
Cracked or separated rubber and new engine vibration can mean a balancer is wearing out. Before you replace the balancer, rule out other sources of the vibration first, since a different part can give a similar feel.
The 1968-1969 Pontiac Bonneville V8 7.0L, the 1968-1978 Bonneville V8 6.6L, the 1970-1976 Bonneville V8 7.5L, the 1971 Bonneville V8 5.7L, the 1974 Bonneville V8 5.7L and the 1977 Bonneville V8 5.7L also take this balancer, along with many other Pontiac, Buick and Oldsmobile models. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One harmonic balancer and one instruction sheet. The center bolt and the bolt and washer are not included, so plan on a new center bolt rather than reusing the old one. This listing is one balancer, and each vehicle takes one.
Interchange: P-GM455
102037 · PB1056N · 1254811 · 477682 · 88960256 · 9794058 · DA4551
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will the Dorman 594-158 harmonic balancer fit a 1971-1976 Pontiac Firebird V8 7.5L?
Yes, Dorman 594-158 fits the 1971-1976 Pontiac Firebird V8 7.5L, the 1968-1977 Firebird V8 5.7L and the 1968-1979 Firebird V8 6.6L. For another model, open the "Vehicles it fits" section.
Does this engine harmonic balancer come with a center bolt?
No. Dorman 594-158 comes as the balancer plus one instruction sheet; the center bolt and the bolt and washer are not included.
What are the diameters of this cast iron harmonic balancer?
The outside diameter is 172.6 mm, the inside diameter is 34.9 mm and the depth is 82.4 mm. It has a keyway and degree markings.
Is the Dorman OE Solutions harmonic balancer a standard replacement grade?
Yes. It is listed as a standard replacement grade and has undergone dimensional verification, material validation and functional testing.
How can I tell if a harmonic balancer's rubber is failing?
With the engine off and cool, look for cracked or separated rubber, and notice any new engine vibration while driving. A shop can confirm whether the balancer is the cause.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.