Dorman - OE Solutions Engine Harmonic Balancer P/N:594-056
Dorman 594-543 harmonic balancer for the 1994-2000 Chevrolet C2500 V8 7.4L and other vehicles absorbs engine vibration through a stress-resistant rubber bond. This Dorman harmonic balancer is a direct replacement and is sold individually.
A cracked or separated rubber bond, a wobbling pulley or engine vibration can mean the balancer is wearing out. A worn drive belt, a weak belt tensioner or a loose accessory pulley can sit behind similar noise and vibration, so find the cause before you buy a balancer.
This balancer is listed for a wide range of Chevrolet, GMC and Workhorse trucks and vans, including the 1994-2000 Chevrolet C3500 V8 7.4L and the 1997-2000 Chevrolet C3500HD V8 7.4L, and these trucks take one balancer each. If your vehicle is not named here, look up its year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
One harmonic balancer. The center bolt, the bolt and washer and mounting hardware are not included; plan on new ones, since the old ones may not be reusable.
Interchange: 24056710973179110 · 102432 · PB1513N · 10216452 · 12550880 · 12553423 · DA6007
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Dorman 594-543 harmonic balancer right for the 1994-2000 Chevrolet C2500 V8 7.4L?
Yes. Dorman 594-543 is listed for the 1994-2000 Chevrolet C2500 V8 7.4L, and the "Vehicles it fits" section covers the other vehicles it fits.
Does Dorman 594-543 come with the center bolt?
No. Dorman 594-543 is one harmonic balancer; the center bolt, bolt and washer and mounting hardware are not included, so plan on new fasteners.
What is the Dorman OE Solutions harmonic balancer made of?
This balancer has a cast iron body with a stress-resistant rubber bond that absorbs engine vibration. It also has a keyway and degree markings.
What are the diameters of this engine harmonic balancer?
The outside diameter is 203.5 mm, the inside and mounting hole diameter is 40.6 mm, and the depth is 65 mm.
How do I check the rubber bond on a harmonic balancer?
With the engine off and cool, look at the rubber for cracks or separation. A wobbling pulley or engine vibration can be a sign too, but other parts can cause them.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.