Dorman - OE Solutions Engine Intake Manifold Runner Control Motor P/N:911-935
Dorman 911-929 intake manifold runner control motor for the 2011-2015 Chevrolet Cruze 4-cylinder 1.8L and other vehicles replaces the failed IMRC motor assembly. It comes from the Dorman OE FIX line and answers the factory plastic tuning arm that breaks, disconnects from the linkage and disables the IMRC valve assembly.
A P2076 code on these engines can come from the factory tuning arm breaking away from the runner linkage. A damaged linkage, a worn connector or wiring can also be behind that code, so find the cause before buying a motor.
This motor is a direct-fit replacement for the 2011-2015 Chevrolet Cruze 4-cylinder 1.8L, the 2012-2018 Chevrolet Sonic 4-cylinder 1.8L and the 2016 Chevrolet Cruze Limited 4-cylinder 1.8L. The 2012-2018 Chevrolet Sonic 4-cylinder 1.8L takes a single motor, as do the other vehicles named here.
Fit and size
Build and materials
One intake manifold runner control motor. Mounting hardware and a gasket or seal are not included, so plan on new fasteners, since the old ones may not be reusable.
Interchange: 55570283
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Dorman 911-929 IMRC motor fit the 2012-2018 Chevrolet Sonic 4-cylinder 1.8L?
Yes. Dorman 911-929 is listed for the 2012-2018 Chevrolet Sonic 4-cylinder 1.8L, along with the 2011-2015 Chevrolet Cruze 4-cylinder 1.8L.
Does this intake manifold runner control motor come with mounting hardware?
No. The box holds one intake manifold runner control motor. Mounting hardware and a gasket or seal are not included.
What is the tuning arm ball made of on this engine intake manifold runner control motor?
Dorman 911-929 has a brass ball stud on its tuning arm instead of the plastic ball used on the factory arm. The motor housing is plastic.
Can a P2076 code on a 1.8L Ecotec engine come from the IMRC tuning arm?
Yes. On these engines the factory plastic tuning arm can break away from the runner linkage and set P2076; a shop can confirm that is the cause.
Do I have to replace the whole intake manifold to fix a failed IMRC motor?
No. The Dorman 911-929 replaces only the IMRC motor assembly, so the intake manifold stays in place.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.