Dorman - OE Solutions Engine Oil Cooler P/N:918-935
Dorman 918-571 oil cooler for the 2014-2016 Volkswagen Jetta 4-cylinder 2.0L and other vehicles helps maintain proper engine oil temperature. This Dorman engine oil cooler is a direct-fit replacement for an original cooler that failed from heat, corrosion or damage.
Oil seeping around the cooler, or oil temperature that runs hotter than normal, can mean the cooler has failed. Those signs alone do not prove the cooler is at fault; a worn seal nearby can leave oil in the same area.
As a direct-fit replacement, this oil cooler suits the 2014-2016 Volkswagen Jetta 4-cylinder 2.0L, the 2012-2016 Volkswagen Tiguan 4-cylinder 2.0L, the 2012-2016 Volkswagen CC 4-cylinder 2.0L and other vehicles. Each engine takes one cooler, and this listing is one. If your car is not named here, open the "Vehicles it fits" section and find your exact model and engine.
Fit and size
Build and materials
One oil cooler. Mounting hardware is not included, so plan on new fasteners rather than reusing the old ones.
Interchange: CLC185000S · 90659 · FC1102E · OCK49 · 06J117021J · V15606020 · 06J117021Q
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a 2014-2016 VW Jetta oil cooler for the 4-cylinder 2.0L engine?
Yes. Dorman 918-571 is listed for the 2014-2016 Volkswagen Jetta 4-cylinder 2.0L. For other models, open the "Vehicles it fits" section and find your exact model and engine.
Is this a 2012-2016 Tiguan oil cooler for the 4-cylinder 2.0L engine?
Yes, the 2012-2016 Volkswagen Tiguan 4-cylinder 2.0L is in the fitment for this oil cooler, and that engine takes one cooler.
Does the Dorman 918-571 oil cooler include mounting hardware?
No. The package holds one oil cooler with an aluminum core and no mounting hardware. Plan on new fasteners rather than reusing the old ones.
What size are the inlet and outlet fittings on this oil cooler?
Both the inlet and the outlet are female fittings. Each has a 0.32 in diameter and a 0.35 in outside diameter.
What damage should I look for on an old oil cooler?
With the engine off and cool, look for cracks, corrosion, dents and oil seepage on the cooler. A shop can test it further if the cause is unclear.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.