Dorman - OE Solutions Engine Oil Cooler P/N:918-935
Dorman 918-625 oil cooler for the 2012-2015 Ford Explorer 4-cylinder 2.0L, the 2016-2026 Explorer 4-cylinder 2.3L and other vehicles helps keep engine oil at a proper temperature. It is built to replace an original cooler that has failed from heat, corrosion or damage.
Oil seeping from the cooler, visible corrosion or damage, or oil that runs hotter than normal can point to a failed cooler. These signs alone do not prove the cooler is the problem; a leaking oil filter housing gasket can look much the same.
This oil cooler is a direct-fit part for the 2013-2023 Ford Escape 4-cylinder 2.5L, the 2013-2018 Ford Focus 4-cylinder 2.0L and the 2016-2018 Focus 4-cylinder 2.3L. If your Ford or Lincoln is not named here, look it up in the "Vehicles it fits" section on this page.
Fit and size
Build and materials
One oil cooler. This listing holds one cooler, and the vehicles it fits take one. Mounting hardware is not included, so plan on new hardware, since the old pieces may not be reusable.
Interchange: AG9Z6A642A · BB3Z6A642A · OCK27
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does Dorman 918-625 work as a Focus oil cooler for the 2013-2018 Ford Focus 4-cylinder 2.0L or the 2016-2018 Focus 4-cylinder 2.3L?
Yes. Dorman 918-625 fits the 2013-2018 Ford Focus 4-cylinder 2.0L and the 2016-2018 Focus 4-cylinder 2.3L. Other vehicles are in the "Vehicles it fits" section.
Will a Ford Escape oil cooler like this one fit the 2013-2023 Escape 4-cylinder 2.5L?
Yes. Dorman 918-625 fits the 2013-2023 Ford Escape 4-cylinder 2.5L, and that engine takes one oil cooler.
What comes with the Dorman engine oil cooler 918-625?
This listing is one oil cooler. Mounting hardware is not included, so plan on new hardware.
What size are the inlet and outlet fittings on this oil cooler?
Dorman 918-625 has female inlet and outlet fittings, each 0.75 in in diameter with a 0.8 in outside diameter.
How can I tell if this oil cooler has failed?
With the engine off and cool, look for oil seepage, corrosion or damage on the cooler. A shop can pressure-test it to confirm.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.