Dorman - OE Solutions Exhaust Manifold P/N:674-198
Dorman 674-987 left exhaust manifold for the 2010-2014 Ford F-150 V8 6.2L and other vehicles routes exhaust gas from the cylinders to the downpipe. This Dorman exhaust manifold is sold as a kit with its gaskets and hardware.
A ticking noise at cold start, an exhaust smell or visible cracks can mean the manifold is leaking. Before you replace it, rule out a loose downpipe joint or a worn gasket at the cylinder head, since either one also lets exhaust escape.
It is a direct-fit replacement for a wide range of Ford models, including the 2010-2014 Ford F-150 V8 6.2L, the 2011-2022 Ford F-250 Super Duty V8 6.2L and the 2011-2022 Ford F-350 Super Duty V8 6.2L. This listing is one manifold for the left side, which takes one; the right side is ordered separately. To see whether your own Ford is covered, look for its year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
One exhaust manifold, two manifold gaskets, two studs and two nuts. A heat shield is not included.
Interchange: 24056704530728292 · 101701 · 663482 · BC3Z9431DA
This part cross-references / interchanges with the following part numbers:
Will this F-150 exhaust manifold fit a 2010-2014 Ford F-150 V8 6.2L?
Yes. Dorman 674-987 is the left-side manifold listed for the 2010-2014 Ford F-150 V8 6.2L. For any other vehicle, look up your year and engine in the "Vehicles it fits" section.
Is this a Ford F-250 Super Duty exhaust manifold for a 2011-2022 Ford F-250 Super Duty V8 6.2L?
Yes. Dorman 674-987 is listed for the 2011-2022 Ford F-250 Super Duty V8 6.2L. It is the left-side piece, and the right side is a separate part.
Does this Dorman manifold come with gaskets and studs?
Yes. The kit has two manifold gaskets, two studs and two nuts along with the manifold. A heat shield is not included.
Can the Dorman exhaust manifold 674-987 replace number BC3Z9431DA?
Yes. BC3Z9431DA is one of the other numbers that Dorman 674-987 replaces, and it is printed on the Interchange line.
How can I check a cast iron exhaust manifold for a leak?
With the engine off and cool, look for cracks or soot streaks around the joints. A ticking noise at cold start or an exhaust smell can also mean a leak, and a shop can confirm it.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.