Dorman - OE Solutions Exhaust Manifold with Integrated Catalytic Converter P/N:674-891
Dorman 674-059 front exhaust manifold catalytic converter for the 2015-2019 Honda CR-V 4-cylinder 2.4L and other vehicles combines the exhaust manifold and the catalytic converter in one piece. It collects exhaust gas from the engine and treats it before it flows into the downpipe.
A rattle from the engine bay, an exhaust leak or a check engine light can mean this converter is worn, though a faulty oxygen sensor or a leaking downpipe gasket can be behind the same signs, so find the cause before you replace it.
This is a direct-fit replacement for the 2015-2019 Honda CR-V 4-cylinder 2.4L, the 2013-2017 Honda Accord 4-cylinder 2.4L and the 2015-2020 Acura TLX 4-cylinder 2.4L, with one converter per vehicle.
Fit and size
Build and materials
One exhaust manifold catalytic converter, one inlet gasket, one outlet gasket, 3 studs, 3 nuts, 7 bolts and 7 washers. Inlet mounting hardware, clamps and hangers are not included, so plan on new inlet fasteners rather than reusing the old ones.
Interchange: 106205609846107475 · 641565 · 17480 · 41228 · 181805PHA00 · 18180RDFA00 · 181905A2A00 · 181905A2A10 · 181905A3L00 · 181905X6J00 · 52024 · 514022
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Dorman 674-059 fit a 2015-2019 Honda CR-V 4-cylinder 2.4L?
Yes. Dorman 674-059 is a front exhaust manifold catalytic converter for the 2015-2019 Honda CR-V 4-cylinder 2.4L, and that engine takes one.
Does Dorman 674-059 come with gaskets and studs?
Yes. Dorman 674-059 includes an inlet gasket, an outlet gasket, 3 studs, 3 nuts, 7 bolts and 7 washers. Clamps and hangers are not included.
Is this Dorman exhaust manifold with integrated catalytic converter CARB compliant?
No. This exhaust manifold catalytic converter is not CARB certified.
Is the outlet flanged on this front exhaust manifold catalytic converter?
Yes. The outlet is flanged with 10 mounting holes, and the inlet port is oval with 4 mounting holes. The material is stainless steel.
How can I check an exhaust manifold catalytic converter for damage?
With the engine off and cool, look for cracks, rust-through or soot marks along the manifold and flanges. A shop can test the converter itself.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.