Dorman - OE Solutions Ignition Knock (Detonation) Sensor Connector P/N:917-141
Dorman 917-033 sensor for the 1999-2006 Chevrolet Silverado 1500 V8 4.8L or 5.3L, the 2003-2006 Silverado 1500 V8 6.0L and other vehicles is the ignition knock (detonation) sensor harness that links the knock sensor to the engine wiring. This Dorman sensor harness carries the knock sensor's signal to the engine computer.
A check engine light, or cracked, brittle or corroded wiring and connectors, can mean this harness needs replacing. These signs alone do not prove the harness is the problem, since a worn knock sensor could just as well be behind them.
It also fits the 1999-2006 GMC Sierra 1500 V8 4.8L or 5.3L and the 1999-2004 Chevrolet Silverado 2500 V8 6.0L, with one harness per vehicle, and is designed to match the original in fit, function and appearance. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One ignition knock sensor harness.
Interchange: PTA1 · 12575869 · 12597415 · 12601822 · 15320926 · 15372170 · 2KNC0025H · 1EC130 · SKJ72001 · PTH1 · J72001 · KNK382 · 1P2069
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is Dorman 917-033 among the GMC Sierra 1500 sensors that fit the 1999-2006 Sierra 1500 V8 4.8L or 5.3L?
Yes. Dorman 917-033 fits the 1999-2006 GMC Sierra 1500 V8 4.8L or 5.3L, and the 2001-2006 Sierra 1500 V8 6.0L. Open the "Vehicles it fits" section to check your exact engine.
Is this one of the Chevrolet Silverado 1500 sensors that fits the 2003-2006 Silverado 1500 V8 6.0L?
Yes. Dorman 917-033 fits the 2003-2006 Chevrolet Silverado 1500 V8 6.0L, as well as the 1999-2006 Silverado 1500 V8 4.8L or 5.3L.
Does this listing include the knock sensor itself?
No. The package holds one ignition knock sensor harness only, so the knock sensor is a separate part.
What wire gauge and length does the Dorman 917-033 harness have?
Dorman 917-033 has two 18 AWG wires, listed at 24.5/33.5 in long. One end has a female oval connector with blade terminals, the other a male oval connector with pin terminals.
How can I check a knock sensor harness for damage?
With the engine off and cool, look for cracked, brittle or corroded wiring and connectors. A check engine light can go along with this, and a shop can test the circuit.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.