Dorman - OE Solutions Ignition Lock Cylinder P/N:924-898
Dorman 924-895 ignition lock cylinder for the 2005 Chevrolet Silverado 1500 V6 4.3L, V8 4.8L, 5.3L or 6.0L and other vehicles replaces the worn lock cylinder in the ignition and comes with four transponder keys. Replacing a lock cylinder usually means reprogramming keys at a dealership, and this Dorman ignition lock cylinder is intended to spare you that visit.
A key that sticks, turns roughly or will not start the engine can mean the lock cylinder is worn. A worn key, a weak battery or a faulty ignition switch can be behind those signs too, so find the cause before buying a cylinder.
This ignition lock cylinder is a direct-fit replacement for the 2005 GMC Sierra 1500 V6 4.3L, V8 4.8L, 5.3L or 6.0L, the 2005 Chevrolet Silverado 2500 V8 5.3L and other vehicles. A 2005 GMC Sierra 1500 with the V8 5.3L takes one lock cylinder.
Fit and size
Build and materials
One ignition lock cylinder and four keys. A wiring harness is not included.
Interchange: US-329L
CS803L · 12457103 · 15785106 · LC63440
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will this Chevy Silverado 1500 ignition lock cylinder fit the 2005 Chevrolet Silverado 1500 V8 5.3L?
Yes. Dorman 924-895 fits the 2005 Chevrolet Silverado 1500 V6 4.3L, V8 4.8L, 5.3L or 6.0L. For another vehicle, look up its year and engine in the "Vehicles it fits" section.
Does this Dorman lock cylinder come with keys, and is a wiring harness included?
Yes. Dorman 924-895 comes with one lock cylinder and four transponder keys. A wiring harness is not included.
What is the Dorman ignition lock cylinder 924-895 made of?
The housing is rubberized plastic and the lock is metal.
How long does it take to program the keys that come with this ignition lock cylinder?
The transponder keys can be programmed in a few minutes. Instructions for the cylinder install and the key programming come with the part.
How can I tell if my ignition lock cylinder is worn out?
A key that is hard to insert, feels rough in the cylinder or will not turn can mean a worn lock cylinder. If you are unsure, a shop can test the ignition.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.