Dorman - OE Solutions Ignition Lock Cylinder P/N:989-043
Dorman 989-015 ignition lock cylinder for the 1980-1989 Volkswagen Jetta 4-cylinder 1.6L, the 1981-1984 Jetta 4-cylinder 1.7L, the 1984-1989 Jetta 4-cylinder 1.8L and other vehicles replaces a broken or worn cylinder in the ignition. This Dorman ignition lock cylinder is engineered to help restore ignition lock function when the original is broken or worn out.
A key that sticks, will not turn or will not come out can mean the cylinder is worn, though a worn key or a faulty ignition switch can produce similar trouble, so find the cause before replacing the cylinder. The ignition takes one cylinder.
This cylinder is a direct replacement and is listed for a wide range of Volkswagen and Audi models, including the 1985-1989 Volkswagen Golf 4-cylinder 1.6L or 1.8L, the 1985 Volkswagen Transporter H4 1.9L and the 1986-1991 Transporter H4 2.1L.
Fit and size
Build and materials
One ignition lock cylinder and two keys. Mounting hardware and a wiring harness are not included, and any old hardware may not be reusable.
Interchange: CS95L · LC14600 · US109L · 191905855 · 113905855B · 411905855C
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a VW Jetta ignition lock cylinder replacement for the 1981-1984 Volkswagen Jetta 4-cylinder 1.7L?
Yes. Dorman 989-015 is listed for the 1981-1984 Volkswagen Jetta 4-cylinder 1.7L, along with the 1980-1989 Jetta 4-cylinder 1.6L and the 1984-1989 Jetta 4-cylinder 1.8L.
Does Dorman 989-015 fit the 1985-1989 Volkswagen Golf 4-cylinder 1.6L or 1.8L?
Yes. It is listed for that Golf and for a wide range of other Volkswagen and Audi models; check your own car in the "Vehicles it fits" section.
Does the Dorman 989-015 lock cylinder come with keys?
Yes. Dorman 989-015 comes with two keys and one lock cylinder. Mounting hardware and a wiring harness are not included.
My key sticks in the ignition; would a new lock cylinder help?
If a worn or broken lock cylinder is the cause, this cylinder replaces it. Signs can include a key that sticks, will not turn or will not come out; with the car off, look at the key for bent or worn spots.
Is the housing on this ignition lock cylinder metal?
Yes. The lock and the housing are both metal, and the housing is silver.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.